Buscar
Mostrando ítems 1-10 de 30
Artículo
Magnetocaloric effect: From materials research to refrigeration devices
(Elsevier, 2018)
The magnetocaloric effect and its most straightforward application, magnetic refrigeration, are topics of current interest due to the potential improvement of energy efficiency of cooling and temperature control systems, ...
Artículo
Tunable magnetocaloric effect around room temperature by Fe doping in Mn0.98Cr(0.02-x)FexAs compound
(Elsevier, 2017)
In this work, we present an investigation of the magnetic and magnetocaloric properties of Mn0.98Cr(0.02-x)FexAs compounds with x = 0.002, 0.005 and 0.010. Our findings show that as Fe content increases the unit cell volume ...
Artículo
Milling effects on magnetic properties of melt spun Fe-Nb-B alloy
(AIP Publishing, 2014-02-25)
Fe75Nb10B15 amorphous ribbons were grinded via ball milling to produce powder samples preserving the amorphous microstructure. A continuous increase of the Curie temperature with the milling time is observed ...
Artículo
A procedure to extract the magnetocaloric parameters of the single phases from experimental data of a multiphase system.
(AIP Publishing, 2014)
In this work, we propose a method to extract the individual parameters that describe the field dependence of magnetic entropy change of each phase in a multiphase system. This method makes use of the scaling laws of the ...
Artículo
Effect of α-Fe impurities on the field dependence of magnetocaloric response in LaFe11.5Si1.5
(Elsevier, 2015)
In this work, the theoretical field dependence of the magnetic entropy change far away from the transition is used to analyze the field dependence of composite materials formed by fcc La(Fe,Si)13 and bcc α-Fe(Si) phases. ...
Artículo
On the use of JMAK theory to describe mechanical amorphization: a comparison between experiments, numerical solutions and simulations
(MDPI, 2018)
The kinetics of amorphization during ball milling is generally analyzed using two different approaches: the classical Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory and Delogu and Cocco’s model for which a region ...
Artículo
Amorphization and evolution of magnetic properties during mechanical alloying of Co62Nb6Zr2B30: dependence on starting boron microstructure
(Elsevier, 2014)
Co62Nb6Zr2B30 composition was mechanically alloyed using three different types of boron powders in the starting mixture: crystalline β-B, commercial amorphous B and optimized amorphous B via ball milling. Using optimized ...
Artículo
Influence of Hot Compaction on Microstructure and Magnetic Properties of Mechanically Alloyed Fe(Co)-based Amorphous Compositions
(Elsevier, 2015)
Amorphous Fe75Nb10B15 and (Fe70Co30)75Nb10B15 alloys were prepared by mechanical alloying from the elemental constituents and hot compacted at different temperatures within the supercooled liquid region. After compaction, ...
Artículo
Analysis of magnetocaloric effect of ball milled amorphous alloys: Demagnetizing factor and Curie temperature distribution
(Elsevier, 2015)
The magnetocaloric effect (MCE) has been measured for an amorphous mechanically alloyed (MA) Co62Nb6Zr2B30. It is demonstrated that sample shape must be taken into account for a correct interpretation of the results, ...
Artículo
Metastable Soft Magnetic Materials Produced by Mechanical Alloying: Analysis Using an Equivalent Time Approach
(Springer Nature, 2013)
Mechanical alloying, a ball milling technique where heterogeneous starting powders are homogenized and alloyed, has become a versatile technique for the production of metastable microstructures: nanocrystalline and/or ...