Buscar
Mostrando ítems 1-6 de 6
Artículo
Influence of Hot Compaction on Microstructure and Magnetic Properties of Mechanically Alloyed Fe(Co)-based Amorphous Compositions
(Elsevier, 2015)
Amorphous Fe75Nb10B15 and (Fe70Co30)75Nb10B15 alloys were prepared by mechanical alloying from the elemental constituents and hot compacted at different temperatures within the supercooled liquid region. After compaction, ...
Artículo
The magnetocaloric effect in soft magnetic amorphous alloys
(2007)
The influence of different compositional modifications on the magnetic entropy change and refrigerant capacity of Finemet, Nanoperm, HiTperm, and bulk amorphous alloys is presented. For all the studied alloys, the field ...
Artículo
Magnetocaloric effect of Co62Nb6Zr2B30 amorphous alloys obtained by mechanical alloying or rapid quenching
(2014)
Amorphous samples of nominal composition Co62Nb6Zr2B30 have been prepared using mechanical alloying (MA) and rapid quenching (RQ) techniques. Differences appear in Curie temperature and the phases developed after ...
Artículo
Grinding and particle size selection as a procedure to enhance the magnetocaloric response of La( Fe, Si)(13) bulk samples
(Elsevier, 2017-05)
The magnetocaloric effect of La(Fe,Si)13 samples deteriorates with the presence of secondary phases. However, it is highly challenging to produce single phase samples by conventional procedures and purification requires ...
Artículo
Relationship between mechanical amorphization and boron integration during processing of FeNbB alloys
(Elsevier, 2014)
Fe75Nb10B15 alloys were prepared by mechanical alloying using different boron powders (crystalline B, commercial amorphous B, optimized amorphous B and intermetallic FeB) in the initial mixture, in order to study the ...
Artículo
Study of Phases Evolution in High-coercive MnAl Powders Obtained Through Short Milling Time of Gas-atomized Particles
(Elsevier, 2017)
Gas-atomized Mn54Al46 particles constituted nominally of only ε- and γ2-phases, i.e. no content of the ferromagnetic L10-type τ-phase, have been used to study the evolution of phases during short time of high-energy milling ...