Buscar
Mostrando ítems 1-10 de 18
Artículo
On the order of magnetic transition in MnCo1−xFexGe (x = 0.20, 0.06 and 0.03) mechanical alloys
(Elsevier, 2023)
Mechanically amorphized MnCo1−xFexGe alloys (x = 0.20, 0.06 and 0.03) were used as precursors to obtain hexagonal austenite single phase samples. Combining thermomagnetic and magnetocaloric analysis and in situ X-ray ...
Artículo
Supersaturated Solid Solution Obtained by Mechanical Alloying of 75% Fe, 20% Ge and 5% Nb Mixture at Different Milling Intensities
(Elsevier, 2009)
Mechanical alloying process of Fe75Ge20Nb5 composition has been studied at different milling frequencies from initial pure powder mixture to the development of a single bcc phase (supersaturated solid solution). As an ...
Artículo
An Equivalent Time Approach for Scaling the Mechanical Alloying Processes
(Elsevier, 2008)
Dynamics of a single ball into a planetary ball mill is analyzed leading to a cubic dependence of the power transferred during milling with the rotational speed, Ω. This leads to the definition of an equivalent time to ...
Artículo
On the use of JMAK theory to describe mechanical amorphization: a comparison between experiments, numerical solutions and simulations
(MDPI, 2018)
The kinetics of amorphization during ball milling is generally analyzed using two different approaches: the classical Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory and Delogu and Cocco’s model for which a region ...
Artículo
Reversibility and Thermal Dependence of the Martensitic Transformation in a Melt-spun Ni55Fe17Ga26Co2 Heusler Alloy
(Elsevier, 2023)
An almost single phase 14 M modulated martensite is obtained in melt spun ribbon of Ni55Fe17Ga26Co2 Heusler alloy. The effect of thermal treatments on the stability of the reverse martensitic transformation from 14 M ...
Artículo
Influence of Hot Compaction on Microstructure and Magnetic Properties of Mechanically Alloyed Fe(Co)-based Amorphous Compositions
(Elsevier, 2015)
Amorphous Fe75Nb10B15 and (Fe70Co30)75Nb10B15 alloys were prepared by mechanical alloying from the elemental constituents and hot compacted at different temperatures within the supercooled liquid region. After compaction, ...
Artículo
Analysis of magnetocaloric effect of ball milled amorphous alloys: Demagnetizing factor and Curie temperature distribution
(Elsevier, 2015)
The magnetocaloric effect (MCE) has been measured for an amorphous mechanically alloyed (MA) Co62Nb6Zr2B30. It is demonstrated that sample shape must be taken into account for a correct interpretation of the results, ...
Artículo
Metastable Soft Magnetic Materials Produced by Mechanical Alloying: Analysis Using an Equivalent Time Approach
(Springer Nature, 2013)
Mechanical alloying, a ball milling technique where heterogeneous starting powders are homogenized and alloyed, has become a versatile technique for the production of metastable microstructures: nanocrystalline and/or ...
Artículo
Analysis of the Mechanically Alloyed Fe85-Nb5-B10 Powder Using a Non-unique Lattice Parameter
(Elsevier, 2008)
X-ray diffraction patterns of mechanically alloyed Fe85Nb5B10 powder were fitted using whole powder pattern decomposition procedure to resemble the presence of α-Fe type crystals with different Nb content. To do so, a ...
Artículo
Obtaining magnetocaloric MnCo(Fe)Ge intermetallics from low temperature treatment of mechanically alloyed precursors
(Elsevier, 2020)
Production of the intermetallic MnCo0.8Fe0.2Ge phase, interesting as magnetocaloric material, is obtained by using an almost fully amorphous mechanically alloyed precursor. Thermal treatment to develop the intermetallic ...