Buscar
Mostrando ítems 71-80 de 167
Artículo
Ultra-fast and energy-efficient sintering of ceramics by electric current concentration
(Nature Publishing Group, 2015)
Electric current activated/assisted sintering (ECAS) techniques, such as electrical discharge sintering (EDS) or resistive sintering (RS), have been intensively investigated for longer than 50 years. In this work, a novel ...
Artículo
Modifications induced in photocuring of Bis- GMA/TEGDMA by the addition of graphene nanoplatelets for 3D printable electrically conductive nanocomposites
(Elsevier, 2019-11)
The incorporation of nanoreinforcement in photocurable polymeric matrices can strongly affect the degree of curing and properties of the final nanocomposites as well as the process parameters for 3D printing. Particularly, ...
Artículo
The prolific polytypism of silicon carbide
(International Union of Crystallography, 2013-02)
A worked example of polytypism is presented, aimed at assisting undergraduates in the learning and instructors in the teaching of this topic. In particular, this crystallography concept, not necessarily obvious for beginners, ...
Artículo
Modelos estructurales del empaquetamiento aleatorio de partículas esféricas de Tobermorita: una aproximación computacional sencilla
(Inst. de Ciencias de la Construccion Eduardo Torroja, 2010)
En este trabajo y con el objetivo de conjugar el punto de vista atomístico y coloidal, presentamos un método com- putacional Monte Carlo que reproduce el empaqueta- miento coloidal de nano-partículas esféricas cristalinas ...
Artículo
Metastable Soft Magnetic Materials Produced by Mechanical Alloying: Analysis Using an Equivalent Time Approach
(Springer Nature, 2013)
Mechanical alloying, a ball milling technique where heterogeneous starting powders are homogenized and alloyed, has become a versatile technique for the production of metastable microstructures: nanocrystalline and/or ...
Artículo
Evolution of Fe environments and phase composition during mechanical amorphization of Fe70Zr30 and Fe70Nb30 alloys
(Elsevier, 2018)
Amorphous Fe-Zr and Fe-Nb alloys with 70 at.% Fe have been prepared by ball milling a mixture of elemental powders. The combination of Mössbauer spectroscopy, X-ray diffraction, scanning electron microscopy and differential ...
Artículo
Structure and magnetic properties of Fe–Nb–B amorphous/nanocrystalline alloys produced by compaction of mechanically alloyed powders
(AIP Publishing, 2010)
Mechanical alloying of Fe75Nb10B15 and Fe85Nb5B10 systems has been performed from an initial mixture of elemental powders. A bcc supersaturated solid solution is developed during milling for both alloys. However, Fe75Nb10B15 ...
Artículo
Avalanche criticalities and elastic and calorimetric anomalies of the transition from cubic Cu-Al-Ni to a mixture of 18R and 2H structures
(American Physical Society, 2016)
We studied the two-step martensitic transition of a Cu-Al-Ni shape-memory alloy by calorimetry, acoustic emission (AE), and resonant ultrasound spectroscopy (RUS) measurements. The transition occurs under cooling from the ...
Artículo
Low hysteresis and large room temperature magnetocaloric effect of Gd 5Si2.05-xGe1.95-xNi2x (2x 0.08, 0.1) alloys
(AIP Publishing, 2013-03-18)
Gd5Si2.05-xGe1.95-xNi2x (2x ¼ 0.08, 0.1) alloys were prepared by arc melting followed by annealing at 1273 K for 96 h. Mixed monoclinic Gd5Si2Ge2-type phase, orthorhombic Gd5Si4-type phase, and a small amount of Gd5Si3-type ...
Artículo
Extracting the composition of nanocrystals of mechanically alloyed systems using Mössbauer spectroscopy
(Elsevier, 2014)
Determining the composition at the nanoscale generally requires the use of experimental techniques such as 3D atom probe or nanoanalysis, which have limited availability, involve high economic cost and, moreover, imply ...