Artículos (Mecánica de Medios Continuos y Teoría de Estructuras): Envíos recientes
Mostrando ítems 61-80 de 389
-
Artículo
Crack detection and localization in RC beams through smart MWCNT/epoxy strip-like strain sensors
(IOP Publishing, 2018-10)In recent years, self-sensing structural materials have drawn enormous attention of scientific community due to their ...
-
Artículo
Closed-form methodology for stress analysis of composite plates with cutouts and non-uniform lay-up
(Elsevier, 2019-03)This study aims to develop a closed-form methodology for estimating the resultant forces in a finite composite plate, ...
-
Artículo
A new in situ peeling test for the characterisation of composite bonded joints
(Elsevier, 2018-10)At the moment, bonded joints quality on composites used in aeronautical industry is verified based on the determination ...
-
Artículo
On the 3D extension of failure models for adhesive joints under mixed-mode fracture conditions: LEBIM and CZM
(Elsevier, 2019-04)Interface models for triggering damage events have been extensively used in many engineering applications due to their ...
-
Artículo
Accurate determination of the stiffness properties for an elastic interface under peeling conditions between homogeneous materials
(Elsevier, 2022-04)In this paper, several models for analysing peeling tests are considered, including numerical models based on FEM, ...
-
Artículo
Closed-form methodology for the bending of symmetric composite plates with cutouts and non-uniform lay-up
(Elsevier, 2021-09)The present work is focused on the development of a Lekhnitskii-based closed-form methodology for the analysis of composite ...
-
Artículo
Strain hardening exponent and strain at maximum stress: Steel rebar case
(Elsevier, 2019-01)The typical distribution of steel used in developed countries, according to World Steel Association, attributes approximately ...
-
Artículo
Experimental mechanical characterization of composite-concrete joints
(Elsevier, 2018-12)The use of composite materials as a reinforcement for concrete in civil construction has become a significant topic, the ...
-
Artículo
Characterization of 3D printed long fibre reinforced composites
(Elsevier, 2018-02)Additive Layer Manufacturing (ALM) process is used in the present investigation to manufacture long fibre reinforced ...
-
Artículo
Experimental study of the size effect on transverse cracking in cross-ply laminates and comparison with the main theoretical models
(Elsevier, 2019-01)Transverse cracking of off-axis plies is typically the first step of some failure mechanisms in long fiber reinforced ...
-
Artículo
Microscopical observations of interface cracks from inter-fibre failure under compression in composite laminates
(Elsevier, 2018-07)Matrix/inter-fibre failure is characterized by the appearance at the fibre–matrix interfaces of small debonds that can ...
-
Artículo
The effect of frequency on tension-tension fatigue behavior of unidirectional and woven fabric graphite-epoxy composites
(Taylor & Francis, 2019-09)In this paper, the effect of different values of load frequency on the evolution of the stress versus number of cycles to ...
-
Artículo
Determination of in-plane and through-the-thickness coefficients of thermal expansion in composite angle brackets using digital image correlation
(Elsevier, 2020-04)A procedure for the simultaneous determination of in-plane and through-the-thickness coefficients of thermal expansion ...
-
Artículo
Predicting failure load of a non-crimp fabric composite by means of a 3D finite element model including progressive damage
(Elsevier, 2019-10)A mesoscopic scale 3D finite element model of its representative unit cell is used to study the progressive damage of a ...
-
Artículo
Modelling the waviness of the fibres in non-crimp fabric composites using 3D finite element models with straight tows
(Elsevier, 2014-01)A new approach to efficiently model the waviness of the fibres in non-crimp fabric (NCF) composites using mesoscale 3D ...
-
Artículo
Numerical investigation of the coupled mechanical behavior of self-healing materials under cyclic loading
(Elsevier, 2019-03)Self-healing structural materials are recognized as a cost effective and sustainable promising alternative to traditional ...
-
Artículo
In silico dynamic characterization of the femur: Physiological versus mechanical boundary conditions
(Elsevier, 2018-08)It is established that bone tissue adapts and responds to mechanical loading. Several studies have suggested an existence ...
-
Artículo
In silico design of magnesium implants: Macroscopic modelling
(Elsevier, 2018-03)Magnesium-based biomedical implants offer many advantages versus traditional ones although some challenges are still ...
-
Artículo
A new reliability-based data-driven approach for noisy experimental data with physical constraints
(Elsevier, 2018-01)Data Science has burst into simulation-based engineering sciences with an impressive impulse. However, data are never ...
-
Artículo
An unsupervised data completion method for physically-based data-driven models
(Elsevier, 2019-02)Data-driven methods are an innovative model-free approach for engineering and sciences, still in process of maturation. ...