Buscar
Mostrando ítems 1-10 de 28
Artículo
Numerical analysis of the crack paths produced by fibre–matrix interface failure in cross-ply LFRP laminates
(Elsevier, 2022-03)
The so-called matrix failure, also named inter-fibre failure, is one of the main failure mechanisms in long fibre reinforced polymers (LFRPs). This mechanism is characterized by the debonding of some fibres when transverse ...
Artículo
Effect of stacking direction and raster angle on the fracture properties of Onyx 3D printed components: A mesoscale analysis
(Elsevier, 2024-02)
3D printing is a technology that has gained increasing importance both in academia and industry for the possibilities offered. Among the many, one of the most appealing is the possibility to choose different printing ...
Artículo
Anisotropy and ageing effect on the mechanical behaviour of 3D-printed short carbon-fibre composite parts
(Elsevier, 2023-10)
The effect of ageing and anisotropy in 3D-printed composites including short carbon fibres embedded in a polyamide (PA/nylon®) matrix is analysed experimentally. A testing campaign including tensile and fracture toughness ...
Artículo
Predicción de delaminaciones múltiples en el ensayo ILTS a través de la implementación del PMTE-SC en Abaqus
(Sociedad Española de Integridad Estructural. Grupo Español de Fractura, 2023-06)
En el presente trabajo se modela el ensayo de resistencia a tracción interlaminar (ILTS por sus siglas en inglés) utilizando una formulación general del Criterio Acoplado de la Mecánica de la Fractura Finita aplicado al ...
Artículo
Ageing effect on the low-velocity impact response of 3D printed continuous fibre reinforced composites
(Elsevier, 2023-12)
This paper aims to analyse the low-velocity impact performance of 3D printed continuous carbon fibre reinforced composites manufactured by fused deposition modelling. Moreover, the effect of ageing on the impact properties ...
Artículo
Caracterización de la interfase en un ensayo a doble cortante pull-push usando un problema inverso y la Mecánica de la Fractura Finita
(Sociedad Española de Integridad Estructural. Grupo español de Fractura, 2021-06)
El criterio acoplado de la Mecánica de la Fractura Finita (CCFFM por sus siglas en inglés) aplicada al Modelo de Interfase Elástica-Lineal Frágil (LEBIM por sus siglas en inglés) ha mostrado ser una herramienta robusta y ...
Artículo
Modeling of interface cracks in a composite with a fibre bundle under biaxial transverse loads
(Grupo Español de Fractura, 2013)
En el presente trabajo se presenta un estudio numérico, donde se caracteriza el inicio y crecimiento de los despegues producidos en las interfases entre fibra y matriz en un material compuesto sometido a cargas transversales ...
Artículo
Numerical multiscale analysis of 3D printed short fiber composites parts: Filament anisotropy and toolpath effects
(Wiley Open Access, 2023-10)
The aim of the present investigation is the development of a numerical model able to adequately represent the effect of several variables, associated to the fused deposition modeling (FDM) procedure, on the mechanical ...
Artículo
A linear elastic-brittle interface model: application for the onset and propagation of a fibre-matrix interface crack under biaxial transverse loads
(Springer, 2015-09)
A new linear elastic and perfectly brittle interface model for mixed mode is presented and analysed. In this model, the interface is represented by a continuous distribution of springs which simulates the presence of a ...
Artículo
Modelado del crecimiento de una grieta en modo I a lo largo de una interfaz débil mediante el MEC. Aplicación al ensayo de fractura interlaminar de materiales compuestos
(Grupo Español de Fractura, 2008)
Se presenta un estudio numérico de propagación de daño en laminados de materiales compuestos. En particular se estudia el ensayo de tenacidad a fractura interlaminar (GIc) de dos láminas unidireccionales de fibra de carbono ...