Buscar
Mostrando ítems 1-7 de 7
Artículo
Characterization of 3D printed long fibre reinforced composites
(Elsevier, 2018-02)
Additive Layer Manufacturing (ALM) process is used in the present investigation to manufacture long fibre reinforced composite parts using the MarkOne® 3D-printer. In ALM, a continuous filament (including a tow of fibres) ...
Artículo
Accurate determination of the stiffness properties for an elastic interface under peeling conditions between homogeneous materials
(Elsevier, 2022-04)
In this paper, several models for analysing peeling tests are considered, including numerical models based on FEM, semi-analytical approaches, and beam models including an elastic interface. Results show that none of the ...
Artículo
On the 3D extension of failure models for adhesive joints under mixed-mode fracture conditions: LEBIM and CZM
(Elsevier, 2019-04)
Interface models for triggering damage events have been extensively used in many engineering applications due to their inherent versatility and relatively simple numerical implementations. Usually, the non-linear behavior ...
Artículo
Tensile and shear strength of bimaterial interfaces within composite materials
(Elsevier, 2016-03)
The determination of the tensile and shear strengths of homogeneous materials can be easily performed by standard tensile and shear (e.g. Iosipescu) tests. Nevertheless, when the determination of these strengths involves ...
Artículo
A new in situ peeling test for the characterisation of composite bonded joints
(Elsevier, 2018-10)
At the moment, bonded joints quality on composites used in aeronautical industry is verified based on the determination of the interlaminar fracture toughness (Gc) obtained by means of the Double Cantilever Beam (DCB) or ...
Artículo
A powerful matrix formalism for stress singularities in anisotropic multi-material corners. Homogeneous (orthogonal) boundary and interface conditions
(Elsevier, 2022-06)
A computational code based on a semianalytic procedure for the determination of the characteristic exponents and the singular stress and displacement fields in multi-material corners is developed. Linear elastic anisotropic ...
Artículo
Influence of the size and depth of a circumferential notch on the impact behavior of streetlights. A passive-safety concept
(Elsevier, 2015-07)
Impact tests on weakened streetlights were carried out using a high energy pendulum. The weakening mechanism consists of a circumferential notch at the base of the streetlight. The objective is twofold: firstly to reduce ...