Buscar
Mostrando ítems 1-5 de 5
Artículo
Characterization of 3D printed long fibre reinforced composites
(Elsevier, 2018-02)
Additive Layer Manufacturing (ALM) process is used in the present investigation to manufacture long fibre reinforced composite parts using the MarkOne® 3D-printer. In ALM, a continuous filament (including a tow of fibres) ...
Artículo
Experimental mechanical characterization of composite-concrete joints
(Elsevier, 2018-12)
The use of composite materials as a reinforcement for concrete in civil construction has become a significant topic, the quality of the joint between composite and concrete being one of the key parameters to study. The ...
Ponencia
Estudio experimental de placas preconformadas en postpandeo
(Asociación Española de Materiales Compuestos (AEMAC), 2015-07)
El pandeo de placas y láminas no necesariamente está asociado al colapso, que en ocasiones se produce para una carga que es varias veces superior. No obstante, aprovechar esta capacidad postpandeo no es fácil, siendo el ...
Artículo
Determination of in-plane and through-the-thickness coefficients of thermal expansion in composite angle brackets using digital image correlation
(Elsevier, 2020-04)
A procedure for the simultaneous determination of in-plane and through-the-thickness coefficients of thermal expansion (CTEs) in composite angle brackets is presented. Carbon fibre/epoxy samples are heated and digital image ...
Artículo
Experimental study of the size effect on transverse cracking in cross-ply laminates and comparison with the main theoretical models
(Elsevier, 2019-01)
Transverse cracking of off-axis plies is typically the first step of some failure mechanisms in long fiber reinforced laminated composites. It is well known that the off-axis ply thickness affects strongly the strain level ...