- idUS
- Investigación
- Ingeniería y Arquitectura
- Mecánica de Medios Continuos y Teoría de Estructuras
- Listar Mecánica de Medios Continuos y Teoría de Estructuras por autor
Listar Mecánica de Medios Continuos y Teoría de Estructuras por autor "Justo Estebaranz, Jesús"
Mostrando ítems 1-20 de 25
-
Ponencia
A modified Brazilian test for the generalized-fracturetoughness determination in multimaterial corners. Numerical and experimental results
Vicentini, Daniane F.; Barroso Caro, Alberto; Justo Estebaranz, Jesús; Mantic, Vladislav; París Carballo, Federico (AEMAC (Asociación Española de Materiales Compuestos), 2011)In the present work, a general procedure for the experimental evaluation of the generalized fracture toughness in ...
-
Patente. Invención
Ala deformable con extradós móvil
París Carballo, Federico; Canas Delgado, José; Justo Estebaranz, Jesús; Rivas Rivas, Damián; Franco Espín, Antonio; Esteban Roncero, Sergio; Gavilán Jiménez, Francisco; Tinoco Franco, Francisco (Oficina Española de Patentes y Marcas (OEPM), 2015-05-12)Ala (1) de avión deformable con extradós móvil que comprende un doble revestimiento (7) sobre el extradós del ala (1) del ...
-
Artículo
Anisotropy and ageing effect on the mechanical behaviour of 3D-printed short carbon-fibre composite parts
Távara Mendoza, Luis Arístides; Madrigal Sánchez, Carmen; Aranda Romero, María Teresa; Justo Estebaranz, Jesús (Elsevier, 2023-10)The effect of ageing and anisotropy in 3D-printed composites including short carbon fibres embedded in a polyamide (PA/nylon®) ...
-
Ponencia
Caracterización de uniones material compuesto-hormigón mediante ensayos de pelado, cortadura, tracción plana y torsión
Mesa, M.J.; Naranjo Pérez, Javier; Macías, M.; León R.; Justo Estebaranz, Jesús; Blázquez Gámez, Antonio; París Carballo, Federico; Cañas Delgado, José; Escriba, S. (Asociación Española de Materiales Compuestos (AEMAC), 2015-07)El presente trabajo se centra en el análisis de diferentes ensayos que permiten determinar la calidad de la unión entre ...
-
Artículo
Characterization of 3D printed long fibre reinforced composites
Justo Estebaranz, Jesús; Távara Mendoza, Luis Arístides; García Guzmán, Lorenzo Francisco; París Carballo, Federico (Elsevier, 2018-02)Additive Layer Manufacturing (ALM) process is used in the present investigation to manufacture long fibre reinforced ...
-
Ponencia
Comparación experimental de la tenacidad a fractura transversal de laminados unidireccionales correspondientes al crecimiento longitudinal o transversal de grietas
Cepero, F.; García García, Israel; Justo Estebaranz, Jesús; Mantic, Vladislav; París Carballo, Federico; Barroso Caro, Alberto (Asociación Española de Materiales Compuestos (AEMAC), 2015-07)El objetivo del trabajo es determinar y comparar, en laminados unidireccionales, las tenacidades a fractura transversal ...
-
Artículo
Determination of Generalized Fracture Toughness in composite multimaterial closed corners with two singular terms - Part II: Experimental results
Vicentini, Daniane F.; Barroso Caro, Alberto; Justo Estebaranz, Jesús; Mantic, Vladislav; París Carballo, Federico (Elsevier, 2012-07)In this paper the experimental part of the procedure for the Generalized-Fracture-Toughness determination in multimaterial ...
-
Artículo
Determination of in-plane and through-the-thickness coefficients of thermal expansion in composite angle brackets using digital image correlation
Graciani Díaz, Enrique; Justo Estebaranz, Jesús; Zumaquero Bernal, Patricia Lucía (Elsevier, 2020-04)A procedure for the simultaneous determination of in-plane and through-the-thickness coefficients of thermal expansion ...
-
Tesis Doctoral
Diseño y desarrollo de ensayos ante carga biaxial transversal en material compuesto para el estudio del fallo entre fibras
Zumaquero Bernal, Patricia Lucía (2022-04-19) -
Ponencia
Estudio experimental de placas preconformadas en postpandeo
Roig, R.; Justo Estebaranz, Jesús; Blázquez Gámez, Antonio; París Carballo, Federico (Asociación Española de Materiales Compuestos (AEMAC), 2015-07)El pandeo de placas y láminas no necesariamente está asociado al colapso, que en ocasiones se produce para una carga que ...
-
Artículo
Evaluation of the interlaminar fracture toughness on composite materials using DCB test on symmetric and unsymmetric configurations
Cañas Delgado, José; Justo Estebaranz, Jesús; París Carballo, Federico (Elsevier, 2022-10)A procedure to measure the interlaminar fracture toughness of a composite material is proposed in this work. This property ...
-
Artículo
Experimental mechanical characterization of composite-concrete joints
Justo Estebaranz, Jesús; París Carballo, Federico (Elsevier, 2018-12)The use of composite materials as a reinforcement for concrete in civil construction has become a significant topic, the ...
-
Artículo
Experimental study of the size effect on transverse cracking in cross-ply laminates and comparison with the main theoretical models
García García, Israel; Justo Estebaranz, Jesús; Simon, A.; Mantic, Vladislav (Elsevier, 2019-01)Transverse cracking of off-axis plies is typically the first step of some failure mechanisms in long fiber reinforced ...
-
Artículo
Influencia en los estudiantes de ingeniería de un modelo integrador de procesos en las clases prácticas
Justo Estebaranz, Jesús; Távara Mendoza, Luis Arístides; Marín Vallejo, Juan Carlos; París Carballo, Federico (Universidad Politécnica de Valencia, 2013)En el presente trabajo se estudia la repercusión en el alumnado y el profesorado novel del desarrollo de un Proyecto de ...
-
Artículo
Innovación docente en Ingeniería: un proyecto innovador de aprendizajes de estudiantes y profesores
Justo Estebaranz, Jesús; Távara Mendoza, Luis Arístides (Red Estatal de Docencia Universitaria, 2014)Este trabajo presenta una experiencia de innovación docente cuyo objetivo es mejorar el aprendizaje de alumnos y profesores ...
-
Artículo
Microscopical observations of interface cracks from inter-fibre failure under compression in composite laminates
Zumaquero Bernal, Patricia Lucía; Correa Montoto, Elena; Justo Estebaranz, Jesús; París Carballo, Federico (Elsevier, 2018-07)Matrix/inter-fibre failure is characterized by the appearance at the fibre–matrix interfaces of small debonds that can ...
-
Tesis Doctoral
Modelling the compaction of composite materials with ultrasonic vibrations
Justo Estebaranz, Jesús (2014-09-29)Los sistemas usuales de fabricación de materiales compuestos, especialmente aquellos empleados en la industria aeronáutica, ...
-
Ponencia
Modelling ultrasonic debulking of tape lamination
Justo Estebaranz, Jesús; Graciani Díaz, Enrique; París Carballo, Federico; Ávila, R. (AEMAC (asociación española de materiales compuestos), 2009)A numerical model is presented, which has been developed to study the quality of the ultrasonic debulking of a composite ...
-
Artículo
On the optimal choice of fibre orientation angle in off-axis tensile test using oblique end-tabs: Theoretical and experimental studies
Marín Vallejo, Juan Carlos; Justo Estebaranz, Jesús; Barroso Caro, Alberto; Cañas Delgado, José; París Carballo, Federico (Elsevier, 2019-07)Shear strength evaluation in composite materials still remains a not fully solved problem. One of most promising proposals ...
-
Ponencia
PGD analysis of the heating of a composite laminate during ultrasonic compaction
Justo Estebaranz, Jesús; Graciani Díaz, Enrique; París Carballo, Federico; Ghnatios, Ch.; Chinesta, F. (Asociación Española de Materiales Compuestos (AEMAC), 2013-07)Compaction of composite layers just after placing them is a key requirement for the new out-of-autoclave in-situ curing ...