Buscar
Mostrando ítems 1-10 de 12
Artículo
Tolerancia al Fallo en Control Directo de Par con Vectores Virtuales de Tensión
(Universidad Politécnica de Valencia (PoliPapers), 2019-01)
La fiabilidad es considerada una característica fundamental en algunos accionamientos eléctricos de velocidad variable. Es por ello que los sistemas multifásicos, que presentan una mayor tolerancia al fallo que los sistemas ...
Artículo
Vectores virtuales de tensión en control directo de par para una máquina de inducción de seis fases
(Universitat Politècnica de València, 2018)
Las máquinas multifásicas se presentan como una alternativa real en aquellas aplicaciones industriales que requieren unas mejores prestaciones que las proporcionadas por los sistemas convencionales trifásicos. La tendencia ...
Artículo
An Experimental Assessment of Open-Phase Fault- Tolerant Virtual Vector Based Direct Torque Control in Five-Phase Induction Motor Drives
(Institute of Electrical and Electronics Engineers, 2018)
Direct torque control (DTC) has been recently used for the development of high performance five-phase induction motor (IM) drives, where normal operation of the system has been usually considered and the ability of DTC ...
Artículo
Open-Phase Fault-Tolerant Direct Torque Control Technique for Five-Phase Induction Motor Drives
(Institute of Electrical and Electronics Engineers, 2017-02)
Direct torque control (DTC) has been widely used as an alternative to traditional field-oriented control (FOC) methods for three-phase drives. The conventional DTC scheme has been successfully extended to multiphase ...
Artículo
Optimal Fault-Tolerant Control of Six-Phase Induction Motor Drives with Parallel Converters
(Institute of Electrical and Electronics Engineers, 2016)
Multiphase drives and parallel converters have been recently proposed in low-voltage high-power applications. The fault-tolerant capability provided by multiphase drives is then extended with parallel converters, increasing ...
Artículo
Assessment of a Universal Reconfiguration-less Control Approach in Open-Phase Fault Operation for Multiphase Drives
(MDPI, 2019-12)
Multiphase drives have been important in particular industry applications where reliability is a desired goal. The main reason for this is their inherent fault tolerance. Di erent nonlinear controllers that do not include ...
Artículo
Model predictive optimal control considering current and voltage limitations: Real-time validation using OPAL-RT technologies and five-phase permanent magnet synchronous machines
(Elsevier, 2019-04)
Multiphase machines have recently gained interest in the research community for their use in applications where high power density, wide speed range and fault-tolerant capabilities are required. The optimal control of ...
Artículo
Impact of post-fault flux adaptation on six-phase induction motor drives with parallel converters
(IEEE, 2017)
The redundancy of multiphase drives provides an inherent fault-tolerant capability that is appreciated in applications with a complicated corrective maintenance or ...
Artículo
Fault-tolerant Operation of Six-phase Energy Conversion Systems with Parallel Machine-side Converters
(Institute of Electrical and Electronics Engineers, 2016-04)
The fault tolerance provided by multiphase machines is one of the most attractive features for industry applications where a high degree of reliability is required. Aiming to take advantage of such postfault operating ...
Artículo
Sensitivity of Predictive Controllers to Parameter Variation in Five-Phase Induction Motor Drives
(Elsevier, 2017)
Model predictive control techniques have been recently proposed as a viable control alternative for power converters and electrical drives. The good current tracking, flexible control design or reduced switching losses ...