Buscar
Mostrando ítems 1-6 de 6
Artículo
Effect of high SWNT content on the room temperature mechanical properties of fully dense 3YTZP/SWNT composites
(Elsevier, 2014)
This paper is devoted to correlate the microstructure and room temperature mechanical properties of single-wall carbon nanotube (SWNT) reinforced 3. mol% yttria stabilized tetragonal zirconia with high SWNT content (2.5, ...
Artículo
In-situ synthesis of a ZrB2–based composite powder using a mechanochemical reaction for the zircon/magnesium/boron oxide/graphite system
(Wiley, 2015)
A ZrSiO4/B2O3/Mg/C system was used to synthesize a ZrB2-based composite through a high-energy ball milling process. As a result of the milling process, a mechanically induced self-sustaining reaction (MSR) was achieved in ...
Artículo
Sliding wear resistance of sintered SiC-fiber bonded ceramics
(Elsevier, 2015)
Advanced SiC-based ceramics and fiber reinforced composites are interesting materials for a wide variety of applications involving sliding wear conditions because of their excellent thermomechanical properties. The ...
Artículo
Creep study on alumina and alumina/SWCNT nanocomposites
(Elsevier, 2018)
Alumina and alumina/SWCNT nanocomposites have been sintered by spark plasma sintering, obtaining relative densities higher than 99%. Microstuctural characterization revealed a grain microstructure in the submicron range, ...
Artículo
Comparative study on high temperature mechanical behavior in 3YTZP containing SWCNTs or MWCNTs
(Elsevier, 2016)
Effects on mechanical properties of the presence of either single-walled carbon nanotubes (SWCNTs) or multi-walled carbon nanotubes (MWCNTs) in a 3YTZP matrix have been investigated in this work. Thus, monolithic 3YTZP and ...
Artículo
Sliding wear resistance of biomorphic SiC ceramics
(Elsevier, 2015)
Biomorphic SiC ceramics were fabricated from four different wood precursors and their Knoop hardness and sliding wear resistance when sliding against a Si3N4 ball in air were studied. Tribological experiments were performed ...