Buscar
Mostrando ítems 51-60 de 67
Artículo
![Con acceso al texto completo Icon](/themes/idUS//images/acceso/opened_access.png)
Insight into the BiFeO3 flash sintering process by in-situ energy dispersive X-ray diffraction (ED-XRD)
(Elsevier, 2018)
The sintering mechanism of BiFeO3 has been investigated in-situ by energy dispersive X-ray diffraction (ED-XRD) using a high-energy white collimated X-ray beam from the Advanced Photon Source (Argonne National Laboratories). ...
Artículo
![Con acceso al texto completo Icon](/themes/idUS//images/acceso/opened_access.png)
Au/CeO2 metallic monolith catalysts: Influence of the metallic substrate
(World Gold Council, 2013)
Ceria-based gold catalysts were successfully deposited on ferritic stainless steel (Fecralloy) and aluminium monoliths. The prepared monolithic and reference powder catalysts were characterized by means of S BET, X-ray ...
Artículo
![Con acceso al texto completo Icon](/themes/idUS//images/acceso/opened_access.png)
Selective UV Reflecting Mirrors Based on Nanoparticle Multilayers
(Wiley-VCH, 2013)
A new type of nanostructured selective ultraviolet (UV) reflecting mirror is presented. Periodic porous multilayers with photonic crystal properties are built by spin-coating-assisted layer-by-layer deposition of colloidal ...
Artículo
![Con acceso al texto completo Icon](/themes/idUS//images/acceso/opened_access.png)
Exploring the benefits of depositing hard TiN thin films by non-reactive magnetron sputtering
(Elsevier, 2013)
The aim of this paper is to compare the mechanical and tribological properties of TiN coatings prepared in a conventional magnetron sputtering chamber according to two different routes: the usual reactive sputtering of a ...
Artículo
![Con acceso al texto completo Icon](/themes/idUS//images/acceso/opened_access.png)
Preparation of ytterbium substituted BiFeO3 multiferroics by mechanical activation
(Elsevier, 2017)
Samples in the system Bi1−xYbxFeO3 (0.02 ≤ × ≤ 0.07) have for the first time been prepared by mechanical activation followed by sintering. XRD and DSC measurements show that the solubility limit of ytterbium in the R3c ...
Artículo
![Con acceso al texto completo Icon](/themes/idUS//images/acceso/opened_access.png)
Electrical properties of reduced 3YTZP ceramics consolidated by spark plasma sintering
(Elsevier, 2016)
3 mol% Yttria doped zirconia ceramics were consolidated by spark plasma sintering (SPS) at two sintering temperatures with the aim of achieving two different reduction levels. Microstructural characterization of the ceramics ...
Artículo
![Con acceso al texto completo Icon](/themes/idUS//images/acceso/opened_access.png)
Comparative study on high temperature mechanical behavior in 3YTZP containing SWCNTs or MWCNTs
(Elsevier, 2016)
Effects on mechanical properties of the presence of either single-walled carbon nanotubes (SWCNTs) or multi-walled carbon nanotubes (MWCNTs) in a 3YTZP matrix have been investigated in this work. Thus, monolithic 3YTZP and ...
Artículo
![Con acceso al texto completo Icon](/themes/idUS//images/acceso/opened_access.png)
Role of looping-calcination conditions on self-reactivation of thermally pretreated CO2 sorbents based on CaO
(American Chemical Society, 2013)
The conversion of thermally pretreated CaO along successive carbonation/calcination cycles has been investigated, as affected by looping-calcination conditions, by means of Thermogravimetric Analysis (TGA). Sorbent samples ...
Artículo
![Con acceso al texto completo Icon](/themes/idUS//images/acceso/opened_access.png)
The Calcium-Looping technology for CO2 capture: On the important roles of energy integration and sorbent behavior
(Elsevier, 2016)
The Calcium Looping (CaL) technology, based on the multicyclic carbonation/calcination of CaO in gas–solid fluidized bed reactors at high temperature, has emerged in the last years as a potentially low cost technology for ...
Artículo
![Con acceso al texto completo Icon](/themes/idUS//images/acceso/opened_access.png)
Preparation of phase pure, dense fine grained ceramics by conventional and spark plasma sintering of La-substituted BiFeO3 nanoparticles
(Elsevier, 2015)
High density ceramics of the system Bi1−xLaxFeO3, 0 ≤ x ≤ 0.15, have been prepared starting from nanoparticles obtained by mechanosynthesis. The ceramics have been sintered conventionally at 850 °C and by spark plasma ...