Buscar
Mostrando ítems 1-10 de 17
Artículo
Comportamiento mecánico a alta temperatura de cerámicas de nitruro de silicio
(2001)
Se ha estudiado el comportamiento mecánico a alta temperatura de dos materiales cerámicos a base de nitruro de silicio: N n02, fabricado por sinterizado a baja presión con ytria, alúmina y magnesia como aditivos y N 3208, ...
Artículo
Dense graphene nanoplatelet/yttria tetragonal zirconia composites: Processing, hardness and electrical conductivity
(Elsevier, 2017)
Yttria tetragonal zirconia ceramic composites with 1, 2.5, 5 and 10 vol% nominal contents of graphene nanoplatelets (GNPs) were fabricated and characterized. First, the GNP dispersion in isopropanol was optimized to ...
Artículo
Detection of the onset of nanocrystallization by calorimetric and magnetic measurements
(AIP Publishing, 2005-01-24)
It is generally accepted that measurements of the magnetic properties are more sensitive than measurements of the enthalpy changes in the detection of the onset of crystallization of ferromagnetic phases emerging from a ...
Artículo
Fabricación y propiedades del carburo de silicio biomórfico: maderas cerámicas
(2002)
En los últimos años se ha puesto de manifiesto un considerable interés en la fabricación y optimización de materiales de microestructura biomórfica. En particular, la fabricación de cerámicas biomórficas es especialmente ...
Artículo
Spark Plasma Sintered Zirconia Ceramic Composites with Graphene-Based Nanostructures
(MDPI, 2018)
The addition of graphene-based nanostructures (GBNs) can improve the inherent fragility of ceramics and provide them with improved electrical and thermal conductivities. However, both the starting material (ceramic matrix ...
Artículo
Espectroscopia de impedancía de monocristales 4.7 mol% Y-PSZ
(Sociedad Española de Cerámica y Vidrio, 1995)
El ajuste mediante el método Rietveld del espectro de difracción de rayos-X de un monocristal Zr02-4.7mol%Y203, muestra la existencia de una microestructura de dos fases t+t'. Los espectros de impedancia de este material ...
Artículo
Effect of acid-treatment and colloidal-processing conditions on the room temperature mechanical and electrical properties of 3YTZP/MWNT ceramic nanocomposites
(Elsevier, 2017)
Different colloidal powder processing routines have been used to prepare composites of 3 mol% Y2O3 -ZrO2 (tetragonal zirconia polycrystals, 3YTZP) with 2.5 vol% multiwall carbon nanotubes (MWNT) with the aim of achieving ...
Artículo
Preferential Co Partitioning to α-Fe in Nanocrystalline CoFeNbB Alloys by Mn Addition
(Elsevier, 2009)
Influence of Mn addition on the microstructure and hyperfine parameters of amorphous and nanocrystalline Co60(FeMn)18Nb6B16 alloys has been studied. Although Mn addition does not yield significant differences in crystallization ...
Artículo
Influence of microstructure on the enhancement of soft magnetic character and the induced anisotropy of field annealed HITPERM-type alloys
(AIP Publishing, 2015)
Hitperm-type rapidly quenched ribbons were submitted to field annealing, both longitudinal field (LF) and transversal field (TF) to the axis of the ribbon. LF annealing yields a reduction of the magnetic anisotropy and ...
Artículo
Kinetic and Microstructural Studies on the Devitrification of Fe60-xCo18MnxNb6B16 Amorphous Alloys
(Elsevier, 2008)
Kinetic and microstructural studies have been performed on Fe60-xCo18MnxNb6B16 (x = 0, 2, 4) alloys by using different techniques. Isothermal and non-isothermal kinetics agree describing the nanocrystallization as a strongly ...