Buscar
Mostrando ítems 1-10 de 12
Artículo
Evolution of Fe environments in mechanically alloyed Fe–Nb–(B) compositions
(Elsevier, 2014)
Nanocrystalline alloys of nominal composition Fe85Nb5B10 were produced by mechanical alloying from a mixture of elemental powders. Two commercial boron structures were used: amorphous and crystalline. In addition, a third ...
Artículo
Effect of Thermal Treatments Below Devitrification Temperature on the Magnetic and Magnetocaloric Properties in Mechanically Alloyed Fe70Zr30 Powders
(Elsevier, 2023)
In this work, the relaxation of the amorphous structure of mechanically alloyed Fe70Zr30 powders has been analyzed through interrupted heating ramps below the devitrification temperature. As a result of such thermal ...
Artículo
Mechanical Amorphization and Recrystallization of Mn-Co(Fe)-Ge(Si) Compositions
(MDPI, 2019-05)
Mechanical alloying using a planetary ball mill allowed us to obtain two homogeneous systems formed by units with nanometer size and MnCo0.8Fe0.2Ge1−xSix stoichiometry (x = 0 and 0.5). The phase evolution of the systems ...
Artículo
Extracting the composition of nanocrystals of mechanically alloyed systems using Mössbauer spectroscopy
(Elsevier, 2014)
Determining the composition at the nanoscale generally requires the use of experimental techniques such as 3D atom probe or nanoanalysis, which have limited availability, involve high economic cost and, moreover, imply ...
Artículo
Hyperfine fields and magnetoelastic surface effects in Fe72Cu1.5Nb4Si13.5B9 nanocrystalline alloy
(Institute of Nuclear Chemistry and Technology, 2003)
In this work hyperfine fields of two-phase nanocrystalline Fe72Cu1.5Nb4Si13.5B9 alloys were studied in order to verify the existence of surface effects. To obtain a series of nanocrystalline samples with small grains of ...
Artículo
Kinetic and Microstructural Studies on the Devitrification of Fe60-xCo18MnxNb6B16 Amorphous Alloys
(Elsevier, 2008)
Kinetic and microstructural studies have been performed on Fe60-xCo18MnxNb6B16 (x = 0, 2, 4) alloys by using different techniques. Isothermal and non-isothermal kinetics agree describing the nanocrystallization as a strongly ...
Artículo
Structural, Vibrational, and Magnetic Characterization of Orthoferrite LaFeO3 Ceramic Prepared by Reaction Flash Sintering
(Multidisciplinary Digital Publishing Institute (MDPI), 2023)
LaFeO3 perovskite ceramics have been prepared via reaction flash technique using Fe2O3 and La2O3 as precursors. The obtained pellets have been investigated using several techniques. The formation of LaFeO3 has been clearly ...
Artículo
Mössbauer study of a Fe–Zr–B–Cu–(Ge, Co) nanocrystalline alloy series
(Elsevier, 2006)
Amorphous and nanocrystalline Fe–Zr–B–Cu alloys with partial substitution of Co for Fe and Ge for B have been studied by Mössbauer spectrometry (MS). The compositional and microstructural dependence of the different hyperfine ...
Artículo
High Temperature Coercivity of Nb-containing HITPERM Alloys: Effect of Cu Addition
(Elsevier, 2008)
Hysteresis loops of nanocrystalline samples of Fe39Co39Nb6B16 - yCuy (y = 0, 1) HITPERM-type alloys were measured from room temperature up to 773K. The alloy with Cu shows a nearly constant value of coercivity (∼ 135A/m) ...
Artículo
Study of the Kinetics and Products of the Devitrification Process of Mechanically Amorphized Fe70Zr30 Alloy
(Elsevier, 2020)
Devitrification of mechanically alloyed amorphous Fe70Zr30 at. % compound consists on a two-step process: amorphous → amorphous + bcc Fe + Fe2Zr → Fe2Zr + Fe23Zr6. This sequence is inferred from the evolution of the Mössbauer ...