Buscar
Mostrando ítems 1-10 de 12
Artículo
A New Method for Determining the Curie Temperature From Magnetocaloric Measurements
(Institute of Electrical and Electronics Engineers, 2016)
A new method is proposed for determining the Curie temperature from magnetocaloric measurements. It is based on the field dependence of the magnetic entropy change close to the Curie temperature. The main advantages over ...
Artículo
Tunable magnetocaloric effect around room temperature by Fe doping in Mn0.98Cr(0.02-x)FexAs compound
(Elsevier, 2017)
In this work, we present an investigation of the magnetic and magnetocaloric properties of Mn0.98Cr(0.02-x)FexAs compounds with x = 0.002, 0.005 and 0.010. Our findings show that as Fe content increases the unit cell volume ...
Artículo
Effect of α-Fe impurities on the field dependence of magnetocaloric response in LaFe11.5Si1.5
(Elsevier, 2015)
In this work, the theoretical field dependence of the magnetic entropy change far away from the transition is used to analyze the field dependence of composite materials formed by fcc La(Fe,Si)13 and bcc α-Fe(Si) phases. ...
Artículo
The role of Ni in modifying the order of the phase transition of La(Fe,Ni,Si)(13)
(Elsevier, 2018)
In this work, we study the effect of Ni substitution on the magnetocaloric properties of La(Fe,Si)13 compounds. Sample quality has been optimized by a combination of induction melting and suction casting techniques, which ...
Artículo
Magnetocaloric response of amorphous and nanocrystalline Cr-containing Vitroperm-type alloys
(Elsevier, 2016)
The broad compositional range in which transition metal (TM) based amorphous alloys can be obtained, yields an easily tunable magnetocaloric effect (MCE) in a wide temperature range. In some TM-based alloys, anomalous ...
Artículo
Influence of Hot Compaction on Microstructure and Magnetic Properties of Mechanically Alloyed Fe(Co)-based Amorphous Compositions
(Elsevier, 2015)
Amorphous Fe75Nb10B15 and (Fe70Co30)75Nb10B15 alloys were prepared by mechanical alloying from the elemental constituents and hot compacted at different temperatures within the supercooled liquid region. After compaction, ...
Artículo
Analysis of magnetocaloric effect of ball milled amorphous alloys: Demagnetizing factor and Curie temperature distribution
(Elsevier, 2015)
The magnetocaloric effect (MCE) has been measured for an amorphous mechanically alloyed (MA) Co62Nb6Zr2B30. It is demonstrated that sample shape must be taken into account for a correct interpretation of the results, ...
Artículo
Optimal temperature range for determining magnetocaloric magnitudes from heat capacity
(Institute of Physics Publishing, 2016)
The determination of the magnetocaloric magnitudes (specific magnetic entropy change, Δs M, and adiabatic temperature change, ΔT ad) from heat capacity (c H) measurements requires measurements performed at very low ...
Artículo
Nanostructuring as a procedure to control the field dependence of the magnetocaloric effect
(Elsevier, 2017-01)
In this work, the field dependence of the magnetocaloric effect of Gd bulk samples has been enhanced through nanostructuring of the material. Nanostructuring consists in multilayers preparation by alternative rf-sputter ...
Artículo
Correction of the Shape Effect on Magnetic Entropy Change in Ball Milled Fe70Zr30 Alloys
(Elsevier, 2018)
The field dependence of the magnetic entropy change (ΔSM) after mechanical alloying of Fe70Zr30 composition starting from high purity powders is studied. Samples with different shapes and different crystalline fraction X ...