Buscar
Mostrando ítems 1-10 de 15
Artículo
A New Method for Determining the Curie Temperature From Magnetocaloric Measurements
(Institute of Electrical and Electronics Engineers, 2016)
A new method is proposed for determining the Curie temperature from magnetocaloric measurements. It is based on the field dependence of the magnetic entropy change close to the Curie temperature. The main advantages over ...
Artículo
Combined kinetic and Bean–Rodbell approach for describing field-induced transitions in LaFe11.6Si1.4 alloys
(Institute of Physics Publishing, 2021)
We propose a combination of the Kolmogorov–Johnson–Mehl–Avrami nucleation and growth theory and the Bean–Rodbell model to describe the field-induced transition in LaFe11.6Si1.4 alloys. The approach is applied to a set of ...
Artículo
The role of Ni in modifying the order of the phase transition of La(Fe,Ni,Si)(13)
(Elsevier, 2018)
In this work, we study the effect of Ni substitution on the magnetocaloric properties of La(Fe,Si)13 compounds. Sample quality has been optimized by a combination of induction melting and suction casting techniques, which ...
Artículo
Magnetocaloric response of amorphous and nanocrystalline Cr-containing Vitroperm-type alloys
(Elsevier, 2016)
The broad compositional range in which transition metal (TM) based amorphous alloys can be obtained, yields an easily tunable magnetocaloric effect (MCE) in a wide temperature range. In some TM-based alloys, anomalous ...
Artículo
Influence of Hot Compaction on Microstructure and Magnetic Properties of Mechanically Alloyed Fe(Co)-based Amorphous Compositions
(Elsevier, 2015)
Amorphous Fe75Nb10B15 and (Fe70Co30)75Nb10B15 alloys were prepared by mechanical alloying from the elemental constituents and hot compacted at different temperatures within the supercooled liquid region. After compaction, ...
Artículo
Analysis of magnetocaloric effect of ball milled amorphous alloys: Demagnetizing factor and Curie temperature distribution
(Elsevier, 2015)
The magnetocaloric effect (MCE) has been measured for an amorphous mechanically alloyed (MA) Co62Nb6Zr2B30. It is demonstrated that sample shape must be taken into account for a correct interpretation of the results, ...
Artículo
A constant magnetocaloric response in FeMoCuB amorphous alloys with different FeB ratios
(AIP Publishing, 2007-05-04)
The magnetocaloric effect of Fe91−xMo8Cu1Bx (x = 15 , 17 , 20) amorphous alloys has been studied. The temperature of the peak of magnetic entropy change can be tuned by altering the Fe / B ratio in pk pk the alloy, without ...
Artículo
Optimal temperature range for determining magnetocaloric magnitudes from heat capacity
(Institute of Physics Publishing, 2016)
The determination of the magnetocaloric magnitudes (specific magnetic entropy change, Δs M, and adiabatic temperature change, ΔT ad) from heat capacity (c H) measurements requires measurements performed at very low ...
Artículo
Obtaining magnetocaloric MnCo(Fe)Ge intermetallics from low temperature treatment of mechanically alloyed precursors
(Elsevier, 2020)
Production of the intermetallic MnCo0.8Fe0.2Ge phase, interesting as magnetocaloric material, is obtained by using an almost fully amorphous mechanically alloyed precursor. Thermal treatment to develop the intermetallic ...
Artículo
The influence of Co addition on the magnetocaloric effect of Nanoperm-type amorphous alloys
(AIP Publishing, 2006-09-22)
The effect of Co addition on the magnetocaloric effect of amorphous alloys with Nanoperm-type composition has been studied for temperatures above room temperature. Co addition produces an increase in the maximum magnetic ...