Buscar
Mostrando ítems 1-10 de 12
Artículo
Structural, Vibrational, and Magnetic Characterization of Orthoferrite LaFeO3 Ceramic Prepared by Reaction Flash Sintering
(Multidisciplinary Digital Publishing Institute (MDPI), 2023)
LaFeO3 perovskite ceramics have been prepared via reaction flash technique using Fe2O3 and La2O3 as precursors. The obtained pellets have been investigated using several techniques. The formation of LaFeO3 has been clearly ...
Artículo
Influence of Milling Time on the Homogeneity and Magnetism of a Fe70Zr30 Partially Amorphous Alloy: Distribution of Curie Temperatures
(MDPI, 2020)
In this work, the mechanically alloyed Fe70Zr30 (at. %) composition has been used to study the influence of milling time on its homogeneity and magnetic properties. The microstructure and Fe environment results show the ...
Artículo
Mössbauer study of a Fe–Zr–B–Cu–(Ge, Co) nanocrystalline alloy series
(Elsevier, 2006)
Amorphous and nanocrystalline Fe–Zr–B–Cu alloys with partial substitution of Co for Fe and Ge for B have been studied by Mössbauer spectrometry (MS). The compositional and microstructural dependence of the different hyperfine ...
Artículo
Hyperfine fields and magnetoelastic surface effects in Fe72Cu1.5Nb4Si13.5B9 nanocrystalline alloy
(Institute of Nuclear Chemistry and Technology, 2003)
In this work hyperfine fields of two-phase nanocrystalline Fe72Cu1.5Nb4Si13.5B9 alloys were studied in order to verify the existence of surface effects. To obtain a series of nanocrystalline samples with small grains of ...
Artículo
Kinetic and Microstructural Studies on the Devitrification of Fe60-xCo18MnxNb6B16 Amorphous Alloys
(Elsevier, 2008)
Kinetic and microstructural studies have been performed on Fe60-xCo18MnxNb6B16 (x = 0, 2, 4) alloys by using different techniques. Isothermal and non-isothermal kinetics agree describing the nanocrystallization as a strongly ...
Artículo
Extracting the composition of nanocrystals of mechanically alloyed systems using Mössbauer spectroscopy
(Elsevier, 2014)
Determining the composition at the nanoscale generally requires the use of experimental techniques such as 3D atom probe or nanoanalysis, which have limited availability, involve high economic cost and, moreover, imply ...
Artículo
Reactive flash sintering of SrFe12O19 ceramic permanent magnets
(Elsevier, 2022)
Reactive flash-sintering technique has been used in order to obtain strontium ferrite magnets from a mixture of SrCO3 and Fe2O3 commercial powders. This technique allows preparing sintered SrFe12O19 at a furnace temperature ...
Artículo
Evolution of Fe environments in mechanically alloyed Fe–Nb–(B) compositions
(Elsevier, 2014)
Nanocrystalline alloys of nominal composition Fe85Nb5B10 were produced by mechanical alloying from a mixture of elemental powders. Two commercial boron structures were used: amorphous and crystalline. In addition, a third ...
Artículo
Effect of Thermal Treatments Below Devitrification Temperature on the Magnetic and Magnetocaloric Properties in Mechanically Alloyed Fe70Zr30 Powders
(Elsevier, 2023)
In this work, the relaxation of the amorphous structure of mechanically alloyed Fe70Zr30 powders has been analyzed through interrupted heating ramps below the devitrification temperature. As a result of such thermal ...
Artículo
Mechanical Amorphization and Recrystallization of Mn-Co(Fe)-Ge(Si) Compositions
(MDPI, 2019-05)
Mechanical alloying using a planetary ball mill allowed us to obtain two homogeneous systems formed by units with nanometer size and MnCo0.8Fe0.2Ge1−xSix stoichiometry (x = 0 and 0.5). The phase evolution of the systems ...