Buscar
Mostrando ítems 1-7 de 7
Artículo
Effect of high SWNT content on the room temperature mechanical properties of fully dense 3YTZP/SWNT composites
(Elsevier, 2014)
This paper is devoted to correlate the microstructure and room temperature mechanical properties of single-wall carbon nanotube (SWNT) reinforced 3. mol% yttria stabilized tetragonal zirconia with high SWNT content (2.5, ...
Artículo
Enhanced carbon nanotube dispersion in 3YTZP/SWNTs composites and its effect on room temperature mechanical and electrical properties
(Elsevier, 2016-10)
In this work, several modifications of the colloidal processing technique and spark plasma sintering (SPS) to prepare yttria tetragonal zirconia composites (YTZP) with single walled carbon nanotubes (SWNT) have been ...
Artículo
Reinforced silica-carbon nanotube monolithic aerogels synthesised by rapid controlled gelation
(Springer Nature, 2018)
This work introduces a new synthesis procedure for obtaining homogeneous silica hybrid aerogels with carbon nanotube contents up to 2.50 wt.%. The inclusion of nanotubes in the highly porous silica matrix was performed by ...
Artículo
Mechanical and electrical properties of low SWNT content 3YTZP composites
(Elsevier, 2015)
Fully dense 3mol% Y2O3-ZrO2 (3YTZP) composites with low single wall carbon nanotube content (0.5, 1 and 1.5vol% SWNT) were prepared by colloidal processing and spark plasma sintering (SPS). SWNT were distributed at ceramic ...
Artículo
Creep study on alumina and alumina/SWCNT nanocomposites
(Elsevier, 2018)
Alumina and alumina/SWCNT nanocomposites have been sintered by spark plasma sintering, obtaining relative densities higher than 99%. Microstuctural characterization revealed a grain microstructure in the submicron range, ...
Artículo
Mechanical behavior of single-layer ceramized zirconia abutments for dental implant prosthetic rehabilitation
(Medical Oral Sl, 2014)
Objectives: This study was undertaken to characterize the mechanical response of bare (as-received) and single layer ceramized zirconia abutments with both internal and external connections that have been developed to ...
Artículo
Creep properties of high dense La9.33Si6O26 electrolyte for SOFCs
(Elsevier, 2020-05)
High density La9.33Si6O26 polycrystals were fabricated by conventional and spark plasma sintering starting from nanopowders synthesized by freeze-drying. The materials exhibit a homogeneous microstructure formed by equiaxed ...