Buscar
Mostrando ítems 1-10 de 10
Artículo
On the use of JMAK theory to describe mechanical amorphization: a comparison between experiments, numerical solutions and simulations
(MDPI, 2018)
The kinetics of amorphization during ball milling is generally analyzed using two different approaches: the classical Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory and Delogu and Cocco’s model for which a region ...
Artículo
Influence of Hot Compaction on Microstructure and Magnetic Properties of Mechanically Alloyed Fe(Co)-based Amorphous Compositions
(Elsevier, 2015)
Amorphous Fe75Nb10B15 and (Fe70Co30)75Nb10B15 alloys were prepared by mechanical alloying from the elemental constituents and hot compacted at different temperatures within the supercooled liquid region. After compaction, ...
Artículo
Analysis of magnetocaloric effect of ball milled amorphous alloys: Demagnetizing factor and Curie temperature distribution
(Elsevier, 2015)
The magnetocaloric effect (MCE) has been measured for an amorphous mechanically alloyed (MA) Co62Nb6Zr2B30. It is demonstrated that sample shape must be taken into account for a correct interpretation of the results, ...
Artículo
Metastable Soft Magnetic Materials Produced by Mechanical Alloying: Analysis Using an Equivalent Time Approach
(Springer Nature, 2013)
Mechanical alloying, a ball milling technique where heterogeneous starting powders are homogenized and alloyed, has become a versatile technique for the production of metastable microstructures: nanocrystalline and/or ...
Artículo
Obtaining magnetocaloric MnCo(Fe)Ge intermetallics from low temperature treatment of mechanically alloyed precursors
(Elsevier, 2020)
Production of the intermetallic MnCo0.8Fe0.2Ge phase, interesting as magnetocaloric material, is obtained by using an almost fully amorphous mechanically alloyed precursor. Thermal treatment to develop the intermetallic ...
Artículo
Correction of the Shape Effect on Magnetic Entropy Change in Ball Milled Fe70Zr30 Alloys
(Elsevier, 2018)
The field dependence of the magnetic entropy change (ΔSM) after mechanical alloying of Fe70Zr30 composition starting from high purity powders is studied. Samples with different shapes and different crystalline fraction X ...
Artículo
Grinding and particle size selection as a procedure to enhance the magnetocaloric response of La( Fe, Si)(13) bulk samples
(Elsevier, 2017-05)
The magnetocaloric effect of La(Fe,Si)13 samples deteriorates with the presence of secondary phases. However, it is highly challenging to produce single phase samples by conventional procedures and purification requires ...
Artículo
Study of the Kinetics and Products of the Devitrification Process of Mechanically Amorphized Fe70Zr30 Alloy
(Elsevier, 2020)
Devitrification of mechanically alloyed amorphous Fe70Zr30 at. % compound consists on a two-step process: amorphous → amorphous + bcc Fe + Fe2Zr → Fe2Zr + Fe23Zr6. This sequence is inferred from the evolution of the Mössbauer ...
Artículo
Effect of Pressure on the Phase Stability and Magnetostructural Transitions in Nickel-rich NiFeGa Ribbons
(Elsevier, 2020)
Ribbons of a Ni55Fe19Ga26 Heusler alloy were prepared by melt spinning technique. The effect of pressure on magnetostructural transitions was studied comparing as-spun ribbons to ribbons previously submitted to an axial ...
Artículo
Milling effects on the distribution of Curie temperatures and magnetic properties of Ni-doped La0·7Ca0·3MnO3 compounds
(Elsevier, 2020)
A systematic study of the magnetic and magnetocaloric properties around the ferromagnetic-paramagnetic phase transition temperature have been carried out on La0.7Ca0.3Mn1-xNixO3 (x = 0, 0.02, 0.07, 0.10) compounds ...