Buscar
Mostrando ítems 1-10 de 11
Artículo
Can Y2O3-MgO eutectics be new promising structural and optical ceramics?
(Elsevier, 2021)
The manuscript addresses the solidification of Y2O3-MgO eutectic composites for the first time, and the study of their microstructure, mechanical properties and infrared transmittance. The composites with eutectic composition ...
Artículo
Enhanced carbon nanotube dispersion in 3YTZP/SWNTs composites and its effect on room temperature mechanical and electrical properties
(Elsevier, 2016-10)
In this work, several modifications of the colloidal processing technique and spark plasma sintering (SPS) to prepare yttria tetragonal zirconia composites (YTZP) with single walled carbon nanotubes (SWNT) have been ...
Artículo
Analysis of magnetocaloric effect of ball milled amorphous alloys: Demagnetizing factor and Curie temperature distribution
(Elsevier, 2015)
The magnetocaloric effect (MCE) has been measured for an amorphous mechanically alloyed (MA) Co62Nb6Zr2B30. It is demonstrated that sample shape must be taken into account for a correct interpretation of the results, ...
Artículo
Creep study on alumina and alumina/SWCNT nanocomposites
(Elsevier, 2018)
Alumina and alumina/SWCNT nanocomposites have been sintered by spark plasma sintering, obtaining relative densities higher than 99%. Microstuctural characterization revealed a grain microstructure in the submicron range, ...
Artículo
Nanostructuring as a procedure to control the field dependence of the magnetocaloric effect
(Elsevier, 2017-01)
In this work, the field dependence of the magnetocaloric effect of Gd bulk samples has been enhanced through nanostructuring of the material. Nanostructuring consists in multilayers preparation by alternative rf-sputter ...
Artículo
Influence of the processing route on the carbon nanotubes dispersion and creep resistance of 3YTZP/SWCNTs nanocomposites
(Wiley-Blackwell, 2015-02-01)
3YTZP matrix composites containing 2.5 vol% of single-walled carbon nanotubes (SWCNT) were fabricated by Spark Plasma Sintering (SPS) at 1250C, following different processing routines with the aim of optimizing the SWCNTs ...
Artículo
Nanocrystallization Kinetics Understood as Multiple Microprocesses Following the Classical Theory of Crystallization
(Elsevier, 2016)
In this work, we propose a model for using the classical Johnson-Mehl-Avrami-Kolmogorov (JMAK) crystallization theory to analyze nanocrystallization processes as a set of multiple microprocesses. This model is based on the ...
Artículo
Grinding and particle size selection as a procedure to enhance the magnetocaloric response of La( Fe, Si)(13) bulk samples
(Elsevier, 2017-05)
The magnetocaloric effect of La(Fe,Si)13 samples deteriorates with the presence of secondary phases. However, it is highly challenging to produce single phase samples by conventional procedures and purification requires ...
Artículo
The role of carbon nanotubes on the stability of tetragonal zirconia polycrystals
(Elsevier, 2018-10)
The effect of single walled carbon nanotubes (SWNT) at zirconia grain boundaries on the stability of a tetragonal zirconia polycrystalline matrix has been explored in as–sintered composites and after low–temperature ...
Artículo
Influence of graphene-based nanostructures processing routes and aspect ratio in flexural strength and fracture mechanisms of 3Y-TZP-matrix composites
(Elsevier, 2024-04-20)
In this work, the influence of the aspect ratio of graphene-based nanostructures (GBNs) and content on the mechanical properties of 3 mol% yttria tetragonal zirconia polycrystalline 3Y-TZP matrix composites was analysed. ...