Perfil del autor: Ferreira, Luis Miguel Marques
Datos institucionales
Nombre | Ferreira, Luis Miguel Marques |
Departamento | Mecánica de Medios Continuos y Teoría de Estructuras |
Área de conocimiento | Mecánica de Medios Continuos y Teoría de Estructuras |
Categoría profesional | Profesor Titular de Universidad |
Correo electrónico | Solicitar |
Estadísticas
-
Nº publicaciones
19
-
Nº visitas
1083
-
Nº descargas
1788
Publicaciones |
---|
Artículo
Impact response of semicylindrical woven composite shells: The effect of stacking sequence
(Elsevier, 2024)
The existing literature extensively explores the influence of stacking sequences on symmetric flat laminates subjected to ... |
Artículo
Damage mechanisms in composite laminated shells subjected to multiple impacts at different points
(John Wiley & Sons / Society of Plastics Engineers, 2024)
This study investigates the effect of damage interference resulting from impact loads on the mechanical response and impact ... |
Artículo
Characterization of Low-Velocity Impact Damage in Asymmetric Composite Shells
(Shahid Chamran University of Ahvaz, 2024)
Based on numerical modelling, this study investigates asymmetric semicylindrical composite laminate shells' damage ... |
Ponencia
Impact Performance of Composite Sandwich Shells with Cork Core
(Springer, 2024)
Composite sandwich structures have gained significant attention in engineering applications due to their exceptional ... |
Artículo
Numerical Characterization of the In-plane Shear Behaviour of Non-Crimp Fabric Composites
(Shahid Chamran University of Ahvaz, 2024)
Experimental off-axis tensile tests aimed at characterising the in-plane shear behaviour of biaxial non-crimp fabric (NCF) ... |
Artículo
Ageing effect on the low-velocity impact response of 3D printed continuous fibre reinforced composites
(Elsevier, 2023)
This paper aims to analyse the low-velocity impact performance of 3D printed continuous carbon fibre reinforced composites ... |
Artículo
Numerical predictions of intralaminar and interlaminar damage in thin composite shells subjected to impact loads
(Elsevier, 2023)
This paper investigates the impact dynamics of thin semicylindrical woven composite laminate shells, with a particular ... |
Ponencia
Impact Response of FRP Composites Used in Civil Structural Applications
(MDPI, 2023)
This study delves into the effect of repeated low-velocity impacts on the residual tensile strength of composite laminates ... |
Ponencia
Residual Tensile Strength of Multi-Impacted Woven Glass Fibre-Reinforced Polymer Composites
(INEGI / FEUP (Faculty of Engineering of University of Porto), 2023)
The effect of multiple low-velocity impacts on the tensile strength of E-glass/epoxy woven fabric composite laminates was ... |
Artículo
Effect of Cohesive Properties on Low-Velocity Impact Simulations of Woven Composite Shells
(MDPI, 2023)
The effect of the interface stiffness and interface strength on the low-velocity impact response of woven-fabric semicylindrical ... |
Artículo
Numerical Simulations of the Low-Velocity Impact Response of Semicylindrical Woven Composite Shells
(MDPI, 2023)
This paper presents an efficient and reliable approach to study the low-velocity impact response of woven composite shells ... |
Artículo
Multi-impact response of semicylindrical composite laminated shells with different thicknesses
(Elsevier, 2023)
Nowadays, composite materials are increasingly used in the most diverse areas of engineering, where non-planar geometries ... |
Ponencia
Cylindrical Sandwich Shells for Civil Engineering Applications
(MDPI, 2023)
Literature is not abundant on the mechanical characterization of cylindrical shells for civil engineering applications, ... |
Artículo
Predicting failure load of a non-crimp fabric composite by means of a 3D finite element model including progressive damage
(Elsevier, 2019)
A mesoscopic scale 3D finite element model of its representative unit cell is used to study the progressive damage of a ... |
Artículo
Three dimensional finite element study of the behaviour and failure mechanism of non-crimp fabric composites under in-plane compression
(Elsevier, 2016)
The compressive behaviour and the mechanism responsible for failure of a [0,90]n non-crimp fabric (NCF) laminate are studied ... |
Artículo
Modelling the waviness of the fibres in non-crimp fabric composites using 3D finite element models with straight tows
(Elsevier, 2014)
A new approach to efficiently model the waviness of the fibres in non-crimp fabric (NCF) composites using mesoscale 3D ... |
Ponencia
In-plane shear behaviour of non-crimp fabric laminates by means of 3D finite element analysis
(2013)
In order to characterize the in-plane shear behaviour of NCF laminates, experimental off-axis tensile tests of [+45,-45]2S ... |
Tesis Doctoral
Study of the Behaviour of Non-Crimp Fabric Laminates by 3D Finite Element Model
(2012)
The aerospace industry is committed to improving the performance of aircraft whilst reducing emissions and weight. Part ... |
Ponencia
Three dimensional finite element model of a non-crimp fabric laminated using geometrically straight tows with crimped material properties
(AEMAC (Asociación Española de Materiales Compuestos), 2009)
The compressive failure of a [0,90]n non-crimp fabric laminate is studied using a 3D finite element model of the representative ... |