Trabajo Fin de Máster
Estudio mecánico de la conversión de una línea aérea de 400 kV a una doble línea de 400/800 kV
Autor/es | Rueda Vázquez, Juan Manuel |
Director | Cruz-Romero, Pedro Luis |
Departamento | Universidad de Sevilla. Departamento de Ingeniería Eléctrica |
Fecha de publicación | 2018 |
Fecha de depósito | 2019-05-13 |
Titulación | Universidad de Sevilla. Máster en Ingeniería Industrial |
Resumen | En este proyecto se va a analizar desde un punto de vista mecánico la posibilidad de adaptar una línea aérea de alta tensión de 400 kV en doble circuito a otra de 800/400 kV, incluyendo un nuevo circuito de 800 kV al doble ... En este proyecto se va a analizar desde un punto de vista mecánico la posibilidad de adaptar una línea aérea de alta tensión de 400 kV en doble circuito a otra de 800/400 kV, incluyendo un nuevo circuito de 800 kV al doble circuito ya existente. Para ello se deberá modificar el diseño del apoyo original o la construcción de un nuevo apoyo conforme a la normativa vigente para poder incluir el nuevo circuito, por lo que habrá que realizar el cálculo de la nueva estructura en un software de cálculo estructural. Para ello se calculará los esfuerzos que el conductor ejerce sobre el apoyo y se obtendrán los esfuerzos a considerar en cada hipótesis de cálculo que marca la normativa vigente. Una vez diseñado el nuevo apoyo (estructura metálica y cimentación) se analizará el proceso de montaje de las modificaciones a realizar sobre la línea existente para instalar el nuevo circuito, y limitaciones que este proceso posee. Por último, se realizará un estudio económico en el que se analice el coste de implantación de este nuevo circuito y se discutirá finalmente su viabilidad. In this project it will be analyzed from a mechanical point of view the possibility of adapting a high voltage airline of 400 kv in double circuit to another of 800/400 kv, including a new circuit of 800 kv to the double ... In this project it will be analyzed from a mechanical point of view the possibility of adapting a high voltage airline of 400 kv in double circuit to another of 800/400 kv, including a new circuit of 800 kv to the double circuit already existing. To do this, the design of the original support or the construction of a new support must be modified according to the current regulations in order to include the new circuit, so the calculation of the new structure in a structural calculation software will have to be done. This will calculate the efforts that the driver exerts on the support and will obtain the efforts to consider in each hypothesis of calculation that sets the current legislation. Once the new support (Metal structure and foundation) is designed, the process of assembling the modifications to be carried out on the existing line will be analyzed to install the new circuit, and limitations that this process possesses. Finally, an economic study will be carried out in which the cost of implantation of this new circuit will be analyzed and the viability will be discussed. |
Cita | Rueda Vázquez, J.M. (2018). Estudio mecánico de la conversión de una línea aérea de 400 kV a una doble línea de 400/800 kV. (Trabajo Fin de Máster Inédito). Universidad de Sevilla, Sevilla. |
Ficheros | Tamaño | Formato | Ver | Descripción |
---|---|---|---|---|
TFM-1343-RUEDA.pdf | 5.169Mb | [PDF] | Ver/ | |