Artículos (Mecánica de Medios Continuos y Teoría de Estructuras)
Recent Submissions
-
Article
Failure initiation criterion in bonded joints with composites based on singularity parameters and practical procedure for design purposes
(Tailor & Francis, 2015)Composite to metal adhesively bonded joints generates critical points where geometry and material properties change abruptly. ...
-
Article
Impact response of semicylindrical woven composite shells: The effect of stacking sequence
(Elsevier, 2024-07)The existing literature extensively explores the influence of stacking sequences on symmetric flat laminates subjected to ...
-
Article
Development of Mortars That Use Recycled Aggregates from a Sodium Silicate Process and the Influence of Graphene Oxide as a Nano-Addition
(MDPI, 2023-11)This research analyses how different cement mortars behave in terms of their physical and mechanical properties. Several ...
-
Article
Effect of stacking direction and raster angle on the fracture properties of Onyx 3D printed components: A mesoscale analysis
(Elsevier, 2024-02)3D printing is a technology that has gained increasing importance both in academia and industry for the possibilities ...
-
Article
Tensile and shear strength of bimaterial interfaces within composite materials
(Elsevier, 2016-03)The determination of the tensile and shear strengths of homogeneous materials can be easily performed by standard tensile ...
-
Article
3D analysis of railway induced vibrations on skew girder bridges including ballast track–bridge interaction effects
(Elsevier, 2023-03)This work is devoted to the analysis of the vibratory response of High-Speed (HS) multi-track railway bridges composed by ...
-
Article
A study of the reproducibility and reliability of the musculo-articular stiffness of the ankle joint
(Elsevier, 2018-06)The objective of this work was to evaluate the reproducibility, reliability and usefulness of the musculo-articular stiffness ...
-
Article
FLEXOR: A support tool for efficient and seamless experiment data processing to evaluate musculo-articular stiffness
(Elsevier, 2019-12)Background and objective: The evaluation of musculo-articular stiffness (MAS) is an increasingly demanded procedure with ...
-
Article
On the optimal choice of fibre orientation angle in off-axis tensile test using oblique end-tabs: Theoretical and experimental studies
(Elsevier, 2019-07)Shear strength evaluation in composite materials still remains a not fully solved problem. One of most promising proposals ...
-
Article
Riveted joints in composites, a practical tool to estimate stresses around the rivet hole
(Elsevier, 2021-05)Riveted joints have different failure mechanisms, some associated to the failure of the rivet itself, and others associated ...
-
Article
A note on Pageau et al. (1994) results for the order of stress singularities in multimaterial junctions
(Elsevier, 2020-05)In 1994, Pageau, Joseph and Biggers Jr. evaluated “The order of stress singularities for bonded and disbonded three-material ...
-
Article
Premature failures in standard test specimens with composite materials induced by stress singularities in adhesive joints
(Elsevier, 2020-03)This work presents three examples of standard test configurations, involving composite materials, where the presence of ...
-
Article
University accreditations and publication of articles on education in Spain
(Routledge (Taylor & Francis), 2021)In recent years, Spain has been far and away the leader in records of publications on education in indexed international ...
-
Article
Numerical and experimental analysis of ultra-thin plies in carbon/epoxy cross-ply laminates subjected to bending after tensile cyclic loading
(Elsevier, 2023-12)As a result of a fatigue testing campaign in cross-ply laminates with different thicknesses in the 90° ply block (conventional ...
-
Article
Design for a cruciform coupon used for tensile biaxial transverse tests on composite materials
(Elsevier, 2017-06)This paper focuses on the design of the appropriate geometry for cruciform coupons conceived to be tested under tensile ...
-
Article
Robust improvement of the finite-element-model updating of historical constructions via a new combinative computational algorithm
(Elsevier, 2024-04)Finite-element-models are usually employed to simulate the behaviour of historical constructions. However, despite the ...
-
Article
The effect of ballast moisture content and fouling index on railway track settlement
(Elsevier, 2024-03)A primary function of railway ballast is to maintain vertical track geometry, however over time it becomes contaminated ...
-
Article
Numerical predictions of intralaminar and interlaminar damage in thin composite shells subjected to impact loads
(Elsevier, 2023-11)This paper investigates the impact dynamics of thin semicylindrical woven composite laminate shells, with a particular ...
-
Article
Damage mechanisms in composite laminated shells subjected to multiple impacts at different points
(John Wiley & Sons / Society of Plastics Engineers, 2024)This study investigates the effect of damage interference resulting from impact loads on the mechanical response and impact ...
-
Article
Analytical expressions to estimate the effective piezoelectric tensor of a textured polycrystal for any crystal symmetry
(Elsevier, 2020-12)This work introduces a set of analytical expressions that simplify the procedure for obtaining closed-form formulas to ...