Presentation
Design of a cruciform specimen for biaxial transverse tests
Author/s | Correa Montoto, Elena
Barroso Caro, Alberto Pérez, M.D. París Carballo, Federico |
Department | Universidad de Sevilla. Departamento de Mecánica de Medios Continuos y Teoría de Estructuras |
Publication Date | 2013-07 |
Deposit Date | 2018-10-09 |
Published in |
|
ISBN/ISSN | 978-84-616-4681-4 |
Abstract | The objective of this paper is the design of the adequate geometry of the cruciform specimens to be tested under biaxial transverse loads. To this end Finite Element models have been developed. The analysis of the results ... The objective of this paper is the design of the adequate geometry of the cruciform specimens to be tested under biaxial transverse loads. To this end Finite Element models have been developed. The analysis of the results provided by the FEM models are used to design a crucifotm geometry that assures that the failure takes place at the central zone of the specimen (the area really subjected to biaxial load) and minimizes undesirable effects such as stress concentrations |
Project ID. | TRA2005-06764
TRA2006 08077 MAT 2009-14022 TEP-02045 TEP-04051 |
Citation | Correa Montoto, E., Barroso Caro, A., Pérez, M.D. y París Carballo, F. (2013). Design of a cruciform specimen for biaxial transverse tests. En MATCOMP´13 (117-122), Algeciras (Cádiz): Asociación Española de Materiales Compuestos (AEMAC). |
Files | Size | Format | View | Description |
---|---|---|---|---|
Design of a cruciform.pdf | 1.028Mb | [PDF] | View/ | |