Buscar
Mostrando ítems 31-40 de 53
Artículo
Two Milling Time Regimes in the Evolution of Magnetic Anisotropy of Mechanically Alloyed Soft Magnetic Powders
(Elsevier, 2011)
The milling time evolution of magnetic anisotropy of ball milled powders can be described considering two regimes. First, for short milling times, the main factor affecting the magnetic behavior of the alloy is the ...
Artículo
Evolution of Fe environments in mechanically alloyed Fe–Nb–(B) compositions
(Elsevier, 2014)
Nanocrystalline alloys of nominal composition Fe85Nb5B10 were produced by mechanical alloying from a mixture of elemental powders. Two commercial boron structures were used: amorphous and crystalline. In addition, a third ...
Artículo
Correction of the Shape Effect on Magnetic Entropy Change in Ball Milled Fe70Zr30 Alloys
(Elsevier, 2018)
The field dependence of the magnetic entropy change (ΔSM) after mechanical alloying of Fe70Zr30 composition starting from high purity powders is studied. Samples with different shapes and different crystalline fraction X ...
Artículo
Effect of Thermal Treatments Below Devitrification Temperature on the Magnetic and Magnetocaloric Properties in Mechanically Alloyed Fe70Zr30 Powders
(Elsevier, 2023)
In this work, the relaxation of the amorphous structure of mechanically alloyed Fe70Zr30 powders has been analyzed through interrupted heating ramps below the devitrification temperature. As a result of such thermal ...
Artículo
The effect of distributed exchange parameters on magnetocaloric refrigeration capacity in amorphous and nanocomposite materials
(AIP Publishing, 2012-02-17)
The temperature dependent magnetization of nanocomposite alloys has been fit with a modified Handrich-Kobe equation with an asymmetric exchange fluctuation parameter combined with the Arrott-Noakes equation. The two equations ...
Artículo
High temperature x ray diffraction determination of the body-centered-cubic-face-centered-cubic transformation temperature in (Fe 70Ni 30) 88Zr 7B 4Cu 1 nanocomposites
(AIP Publishing, 2012-02-16)
In situ high-temperature x ray diffraction and magnetization measurements were performed on a melt-spun (Fe70Ni30)88Zr7B4Cu1 amorphous alloy to follow its structural evolution. At 728 K, a bcc-FeNi phase was observed as ...
Artículo
Devitrification of Mechanically Alloyed Fe-Nb System: Mössbauer Study of the Intermetallic Phases
(Springer Nature, 2020)
Intermetallic phases in the Fe-Nb system have been obtained as products of the devitrification of a homogeneous amorphous Fe70Nb30 alloy prepared by mechanical alloying. Besides Fe2Nb Laves and Fe7Nb6 intermetallic phases, ...
Artículo
Kinetic Analysis of the Transformation from 14M Martensite to L21 Austenite in Ni-Fe-Ga Melt Spun Ribbons
(Multidisciplinary Digital Publishing Institute (MDPI), 2021)
In this study, the non-isothermal kinetics of the martensitic transition from 14M modulated martensite to austenite phase in Ni55Fe19Ga26 ribbons obtained by melt-spinning has been analyzed. The proximity of the martensitic ...
Artículo
Mechanical Amorphization and Recrystallization of Mn-Co(Fe)-Ge(Si) Compositions
(MDPI, 2019-05)
Mechanical alloying using a planetary ball mill allowed us to obtain two homogeneous systems formed by units with nanometer size and MnCo0.8Fe0.2Ge1−xSix stoichiometry (x = 0 and 0.5). The phase evolution of the systems ...
Artículo
Influence of the demagnetizing factor on the magnetocaloric effect: Critical scaling and numerical simulations
(AIP Publishing, 2014)
In recent years, the magnetocaloric effect is studied not only for the search of potential magnetic refrigerant materials but also for the analysis of critical phenomena. In both cases, the demagnetizing field might have ...