Buscar
Mostrando ítems 21-30 de 82
Artículo
Microstructure and Magnetic Properties of Mo Containing Nanoperm-Type Alloys
(Russian Academy of Sciences, 2008)
The influence of composition changes on the devitrification process, microstructure and magnetic properties of (Fe,Co)MoB(Cu) alloys was investigated. Amorphous and nanocrystalline samples were studied by differential ...
Artículo
Non-Isothermal approach to isokinetic crystallization processes: application to the nanocrystallization of HITPERM alloys
(Elsevier, 2005)
A new approach is proposed for the study of crystallization processes under the hypothesis of isokinetic behavior. From a direct extension of the Avrami theory to non-isothermal regimes, an expression of the local Avrami ...
Artículo
Effect of the Si/B ratio on the magnetic anisotropy distribution of Fe73.5Si22.52xBxCu1Nb3 „x57,9,16… alloys along nanocrystallization
(AIP Publishing, 1998)
The effect of the Si/B ratio on the magnetic anisotropy distribution of Fe73.5Si22.52xBxCu1Nb3 (x57,9,16) alloys has been studied. The influence of isochronal annealing on the hysteresis loop of the three studied alloys ...
Artículo
Influence of Milling Time on the Homogeneity and Magnetism of a Fe70Zr30 Partially Amorphous Alloy: Distribution of Curie Temperatures
(MDPI, 2020)
In this work, the mechanically alloyed Fe70Zr30 (at. %) composition has been used to study the influence of milling time on its homogeneity and magnetic properties. The microstructure and Fe environment results show the ...
Artículo
Effects of high temperature treatments in air and argon on the magnetic properties of HITPERM alloys
(Elsevier, 2006)
The oxidation behavior of FeCo(NbZr)B(Cu) alloy series was studied. After heating up to 1073 K, an oxide layer View the MathML source∼1μm thick with a two-layer structure can be identified previous to a sharp interface ...
Artículo
On the use of JMAK theory to describe mechanical amorphization: a comparison between experiments, numerical solutions and simulations
(MDPI, 2018)
The kinetics of amorphization during ball milling is generally analyzed using two different approaches: the classical Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory and Delogu and Cocco’s model for which a region ...
Artículo
Nanocrystallization effects on the specific heat of fe-co-nb-b amorphous alloy
(Elsevier, 2008)
Specific heat at constant pressure, CP, was measured on amorphous, nanocrystalline and fully crystalline samples of Fe60Co18Nb6B16 alloy. Magnetic and calorimetric measurements agree, describing a continuously decreasing ...
Artículo
Refrigerant capacity of FeCrMoCuGaPCB amorphous alloys
(2006)
The magnetocaloric effect of the FeCrMoCuGaPCB alloy series, suitable for being prepared as bulk amorphous alloys, has been studied. Optimal refrigeration cycles have a cold reservoir close to room temperature. The ...
Artículo
Reversibility and Thermal Dependence of the Martensitic Transformation in a Melt-spun Ni55Fe17Ga26Co2 Heusler Alloy
(Elsevier, 2023)
An almost single phase 14 M modulated martensite is obtained in melt spun ribbon of Ni55Fe17Ga26Co2 Heusler alloy. The effect of thermal treatments on the stability of the reverse martensitic transformation from 14 M ...
Artículo
Mechanical Alloying as a Way to Produce Metastable Single-Phase High-Entropy Alloys beyond the Stability Criteria
(MDPI, 2023-12)
Various stability criteria developed for high-entropy alloys are applied to compositions produced by mechanical alloying. While they agree with the annealed samples, these criteria fail to describe the as-milled metastable ...