Buscar
Mostrando ítems 11-20 de 69
Artículo
Specific Heat Measurements on Amorphous and Nanocrystalline Al88Y5Ni5Co2
(Elsevier, 2009)
Specific heat at constant pressure, CP, was measured on amorphous and nanocrystalline Al88Y5Ni5Co2 alloys from differential scanning calorimetry experiments. Linear behavior of CP versus temperature from 323 to 423 K is ...
Artículo
Enhancement of the Magnetic Refrigerant Capacity in Partially Amorphous Fe 70Zr 30 Powders Obtained by Mechanical Alloying
(Elsevier, 2012)
After mechanical alloying Fe 70Zr 30 composition from pure starting powders, an amorphous phase with Curie temperature T C = 244 K and an intermetallic compound (that should be non-stoichiometric Zr-rich fcc Fe 2Zr phase) ...
Artículo
Crystallization behavior and magnetic properties of Cu-containing Fe- Cr- Mo- Ga- P- C- B alloys
(2006)
Multicomponent Fe65.5Cr4Mo4Ga4P12C5B5.5 amorphous alloy is known to have good soft magnetic properties combined with large glass-forming ability. Searching for a nanocrystalline structure that could improve its magnetic ...
Artículo
Excellent Cryogenic Magnetocaloric Properties in Heavy Rare-earth Based HRENiGa2 (HRE = Dy, Ho, or Er) Compounds
(Science Press, 2023)
RENiX2 compounds, where RE = rare-earth element and X = p-block element, have been highly regarded for cryogenic magnetocaloric applications. Depending on the elements, they can crystallize in CeNiSi2-type, NdNiGa2-type, ...
Artículo
Cellular automata simulations on nanocrystallization processes: From instantaneous growth approximation to limited growth
(Elsevier, 2011-07)
Cellular automata simulations have been performed to simulate the crystallization process under a limited growth approximation. This approximation resembles several characteristics exhibited by nanocrystalline microstructures ...
Artículo
Supersaturated Solid Solution Obtained by Mechanical Alloying of 75% Fe, 20% Ge and 5% Nb Mixture at Different Milling Intensities
(Elsevier, 2009)
Mechanical alloying process of Fe75Ge20Nb5 composition has been studied at different milling frequencies from initial pure powder mixture to the development of a single bcc phase (supersaturated solid solution). As an ...
Artículo
Thermal and Microstructural Dependence of the Initial Permeability of Co60Fe18Nb6(B,Cu)16 Alloys
(Elsevier, 2007)
The thermal and microstructural dependence of the initial permeability of Co60Fe18Nb6B16-yCuy (y = 0, 1) alloys have been studied. The comparison of kinetics and microstructural data of the two compositions indicate the ...
Artículo
Anisotropy field distribution in soft magnetic Hitperm alloys submitted to different field annealing processes
(Elsevier, 2016)
The magnetic anisotropy field distribution is discussed for Hitperm alloys annealed under different field conditions leading to different induced magnetic anisotropies: zero (ZF), transversal (TF), and longitudinal (LF) ...
Artículo
Elusive super-hard B6C accessible through the laser-floating zone method
(Nature, 2019)
Boron carbide is among the most promising ceramic materials nowadays: their mechanical properties are outstanding, and they open potential critical applications in near future. Since sinterability is the most critical ...
Artículo
Electrical conduction mechanisms in graphene nanoplatelet/yttria tetragonal zirconia composites
(Elsevier, 2018-08)
Yttria tetragonal zirconia polycrystalline (3YTZP) ceramic composites with 5, 10 and 20 vol% graphene nanoplatelets (GNPs) were prepared by spark plasma sintering (SPS) and their electrical conductivity as a function ...