Buscar
Mostrando ítems 1-10 de 14
Artículo
Thermal Arrest Analysis of the Reverse Martensitic Transformation in a Ni55Fe19Ga26 Heusler Alloy Obtained by Melt-spinning
(Springer Nature, 2023)
Ni55Fe19Ga26 ribbons obtained by melt-spinning technique exhibit a martensitic transformation from L21 cubic austenite phase to 14 M martensite phase above room temperature. We have taken advantage of the existence of ...
Artículo
On the order of magnetic transition in MnCo1−xFexGe (x = 0.20, 0.06 and 0.03) mechanical alloys
(Elsevier, 2023)
Mechanically amorphized MnCo1−xFexGe alloys (x = 0.20, 0.06 and 0.03) were used as precursors to obtain hexagonal austenite single phase samples. Combining thermomagnetic and magnetocaloric analysis and in situ X-ray ...
Artículo
Influence of Milling Time on the Homogeneity and Magnetism of a Fe70Zr30 Partially Amorphous Alloy: Distribution of Curie Temperatures
(MDPI, 2020)
In this work, the mechanically alloyed Fe70Zr30 (at. %) composition has been used to study the influence of milling time on its homogeneity and magnetic properties. The microstructure and Fe environment results show the ...
Artículo
Reversibility and Thermal Dependence of the Martensitic Transformation in a Melt-spun Ni55Fe17Ga26Co2 Heusler Alloy
(Elsevier, 2023)
An almost single phase 14 M modulated martensite is obtained in melt spun ribbon of Ni55Fe17Ga26Co2 Heusler alloy. The effect of thermal treatments on the stability of the reverse martensitic transformation from 14 M ...
Artículo
Mechanical Alloying as a Way to Produce Metastable Single-Phase High-Entropy Alloys beyond the Stability Criteria
(MDPI, 2023-12)
Various stability criteria developed for high-entropy alloys are applied to compositions produced by mechanical alloying. While they agree with the annealed samples, these criteria fail to describe the as-milled metastable ...
Artículo
Obtaining magnetocaloric MnCo(Fe)Ge intermetallics from low temperature treatment of mechanically alloyed precursors
(Elsevier, 2020)
Production of the intermetallic MnCo0.8Fe0.2Ge phase, interesting as magnetocaloric material, is obtained by using an almost fully amorphous mechanically alloyed precursor. Thermal treatment to develop the intermetallic ...
Artículo
Effect of Thermal Treatments Below Devitrification Temperature on the Magnetic and Magnetocaloric Properties in Mechanically Alloyed Fe70Zr30 Powders
(Elsevier, 2023)
In this work, the relaxation of the amorphous structure of mechanically alloyed Fe70Zr30 powders has been analyzed through interrupted heating ramps below the devitrification temperature. As a result of such thermal ...
Artículo
Devitrification of Mechanically Alloyed Fe-Nb System: Mössbauer Study of the Intermetallic Phases
(Springer Nature, 2020)
Intermetallic phases in the Fe-Nb system have been obtained as products of the devitrification of a homogeneous amorphous Fe70Nb30 alloy prepared by mechanical alloying. Besides Fe2Nb Laves and Fe7Nb6 intermetallic phases, ...
Artículo
Kinetic Analysis of the Transformation from 14M Martensite to L21 Austenite in Ni-Fe-Ga Melt Spun Ribbons
(Multidisciplinary Digital Publishing Institute (MDPI), 2021)
In this study, the non-isothermal kinetics of the martensitic transition from 14M modulated martensite to austenite phase in Ni55Fe19Ga26 ribbons obtained by melt-spinning has been analyzed. The proximity of the martensitic ...
Artículo
Comparative study of structural and magnetic properties of ribbon and bulk Ni55Fe19Ga26 Heusler alloy
(Elsevier, 2021)
The influence of the fabrication method on the magnetostructural properties of a Ni55Fe19Ga26 Heusler alloy, obtained both as a ribbon, by melt-spinning, and as a pellet, by arc-melting, has been analyzed. It has ...