Buscar
Mostrando ítems 1-10 de 19
Artículo
High temperature internal friction measurements of 3YTZP zirconia polycrystals. High temperature background and creep
(Elsevier, 2014)
This work focuses on the high-temperature mechanic properties of a 3. mol% yttria zirconia polycrystals (3YTZP), fabricated by hot-pressureless sintering. Systematic measurements of mechanical loss as a function of temperature ...
Artículo
Effect of high SWNT content on the room temperature mechanical properties of fully dense 3YTZP/SWNT composites
(Elsevier, 2014)
This paper is devoted to correlate the microstructure and room temperature mechanical properties of single-wall carbon nanotube (SWNT) reinforced 3. mol% yttria stabilized tetragonal zirconia with high SWNT content (2.5, ...
Tesis Doctoral
Fabricación y comportamiento mecánico de cerámicas no oxídicas
(2010)
En el primer capítulo se describe brevemente la estructura cristalográfica de los distintos polítipos en que se presenta el carburo de silicio, las técnicas de fabricación de monocristales de SiC, sus sistemas de deslizamiento ...
Artículo
High temperature creep of 20 vol%. SiC-HfB2 UHTCs up to 2000 °C and the effect of La2O3 addition
(Elsevier, 2018)
High temperature compressive creep of SiC-HfB2 UHTCs up to 2000 °C has been studied. Microstructural analysis after deformation reveals formation of new phases in the Hf-B-Si and Hf-B-Si-C systems, which are responsible ...
Artículo
Intragranular carbon nanotubes in alumina-based composites for reinforced ceramics
(Springer Nature, 2019)
The traditional methods for the synthesis of reinforced alumina-based matrix composites with carbon nanotubes (CNTs) have presented serious difficulties for obtaining well-dispersed and homogeneously distributed CNTs within ...
Tesis Doctoral
Artículo
Enhanced carbon nanotube dispersion in 3YTZP/SWNTs composites and its effect on room temperature mechanical and electrical properties
(Elsevier, 2016-10)
In this work, several modifications of the colloidal processing technique and spark plasma sintering (SPS) to prepare yttria tetragonal zirconia composites (YTZP) with single walled carbon nanotubes (SWNT) have been ...
Artículo
Hardness and flexural strength of single-walled carbon nanotube/alumina composites
(Kluwer Academic Publishers, 2014)
This work adds new experimental facts on room temperature hardness and flexural strength of alumina and composites with 1, 2, 5 and 10 vol% single-walled carbon nanotubes (SWNT) with similar grain size. Monolithic Al2O3 ...
Patente
Procedimiento de fabricación de materiales avanzados por concentración de corriente eléctrica.
(Oficina Española de Patentes y Marcas , 2015-11-24)
La presente invención tiene por objeto la obtención de materiales avanzados, ya sean conductores o aislantes eléctricos a partir del aislamiento eléctrico de un molde conductor, preferentemente grafito, usando una lámina ...
Artículo
Ultra-fast and energy-efficient sintering of ceramics by electric current concentration
(Nature Publishing Group, 2015)
Electric current activated/assisted sintering (ECAS) techniques, such as electrical discharge sintering (EDS) or resistive sintering (RS), have been intensively investigated for longer than 50 years. In this work, a novel ...