Buscar
Mostrando ítems 31-40 de 49
Artículo
Nanocrystallization Kinetics Understood as Multiple Microprocesses Following the Classical Theory of Crystallization
(Elsevier, 2016)
In this work, we propose a model for using the classical Johnson-Mehl-Avrami-Kolmogorov (JMAK) crystallization theory to analyze nanocrystallization processes as a set of multiple microprocesses. This model is based on the ...
Artículo
Numerical Simulation of a Wall-Flow Particulate Filter Made of Biomorphic Silicon Carbide Able to Fit Different Fuel/Biofuel Inputs
(MDPI, 2019-12)
To meet the increasingly strict emission limits imposed by regulations, internal combustion engines for transport applications require the urgent development of novel emission abatement systems. The introduction of ...
Artículo
Mg2SiO4-MgAl2O4 Directionally Solidified Eutectics: Hardness Dependence Modelled Through an Array of Screw Dislocations
(Elsevier, 2020)
Mg2SiO4-MgAl2O4 eutectic ceramics have been fabricated by means of the laser floating zone (LFZ) technique. The microstructure has revealed as an unusual one at lower growth rate, composed of broken lamellae of MgAl2O4 ...
Artículo
Sensitive response of GNP/epoxy coatings as strain sensors: Analysis of tensile-compressive and reversible cyclic behavior
(Institute of Physics Publishing, 2020-06)
The electromechanical performance and reversibility of sensitive GNP/epoxy strain sensors were experimentally and theoretically analyzed. Under tensile loads, the strain sensors showed lower sensitivity and more linearity ...
Artículo
Directionally Solidified Cobalt-Doped MgO-MgAl2O4 Eutectic Composites for Selective Emitters
(Multidisciplinary Digital Publishing Institute (MDPI), 2022)
Cobalt-doped MgO-MgAl2O4 eutectic composites were explored for their use as selective emitters for thermophotovoltaic devices. Eutectic ceramic rods with different cobalt content were directionally solidified by using ...
Artículo
Flue gas adsorption by single-wall carbon nanotubes: A Monte Carlo study
(American Institute of Physics Publising LLC, 2016)
Adsorption of flue gases by single-wall carbon nanotubes (SWCNT) has been studied by means of Monte Carlo simulations. The flue gas is modeled as a ternary mixture of N2, CO2, and O2, emulating realistic compositions of ...
Artículo
Microstructure and Thermal Conductivity of Si-Al-C-O Fiber Bonded Ceramics Joined to Refractory Metals
(Elsevier, 2020)
We explore joining Si-Al-C-O fiber-bonded ceramics to Cu-clad-Mo using an Ag-Ti-Cu brazing alloy. A temperature of 900 °C and times in the range of 10–20 min are required to obtain sound joints irrespectively of the fiber ...
Artículo
Grinding and particle size selection as a procedure to enhance the magnetocaloric response of La( Fe, Si)(13) bulk samples
(Elsevier, 2017-05)
The magnetocaloric effect of La(Fe,Si)13 samples deteriorates with the presence of secondary phases. However, it is highly challenging to produce single phase samples by conventional procedures and purification requires ...
Artículo
Influence of the starting temperature of calorimetric measurements on the accuracy of determined magnetocaloric effect
(Elsevier, 2018)
Availability of a restricted heat capacity data range has a clear influence on the accuracy of calculated magnetocaloric effect, as confirmed by both numerical simulations and experimental measurements. Simulations using ...
Artículo
Dense graphene nanoplatelet/yttria tetragonal zirconia composites: Processing, hardness and electrical conductivity
(Elsevier, 2017)
Yttria tetragonal zirconia ceramic composites with 1, 2.5, 5 and 10 vol% nominal contents of graphene nanoplatelets (GNPs) were fabricated and characterized. First, the GNP dispersion in isopropanol was optimized to ...