Buscar
Mostrando ítems 11-20 de 40
Artículo
Supersaturated Solid Solution Obtained by Mechanical Alloying of 75% Fe, 20% Ge and 5% Nb Mixture at Different Milling Intensities
(Elsevier, 2009)
Mechanical alloying process of Fe75Ge20Nb5 composition has been studied at different milling frequencies from initial pure powder mixture to the development of a single bcc phase (supersaturated solid solution). As an ...
Artículo
Thermal and Microstructural Dependence of the Initial Permeability of Co60Fe18Nb6(B,Cu)16 Alloys
(Elsevier, 2007)
The thermal and microstructural dependence of the initial permeability of Co60Fe18Nb6B16-yCuy (y = 0, 1) alloys have been studied. The comparison of kinetics and microstructural data of the two compositions indicate the ...
Artículo
An Equivalent Time Approach for Scaling the Mechanical Alloying Processes
(Elsevier, 2008)
Dynamics of a single ball into a planetary ball mill is analyzed leading to a cubic dependence of the power transferred during milling with the rotational speed, Ω. This leads to the definition of an equivalent time to ...
Artículo
On the use of JMAK theory to describe mechanical amorphization: a comparison between experiments, numerical solutions and simulations
(MDPI, 2018)
The kinetics of amorphization during ball milling is generally analyzed using two different approaches: the classical Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory and Delogu and Cocco’s model for which a region ...
Artículo
Influence of Hot Compaction on Microstructure and Magnetic Properties of Mechanically Alloyed Fe(Co)-based Amorphous Compositions
(Elsevier, 2015)
Amorphous Fe75Nb10B15 and (Fe70Co30)75Nb10B15 alloys were prepared by mechanical alloying from the elemental constituents and hot compacted at different temperatures within the supercooled liquid region. After compaction, ...
Artículo
Metastable Soft Magnetic Materials Produced by Mechanical Alloying: Analysis Using an Equivalent Time Approach
(Springer Nature, 2013)
Mechanical alloying, a ball milling technique where heterogeneous starting powders are homogenized and alloyed, has become a versatile technique for the production of metastable microstructures: nanocrystalline and/or ...
Artículo
Analysis of the Mechanically Alloyed Fe85-Nb5-B10 Powder Using a Non-unique Lattice Parameter
(Elsevier, 2008)
X-ray diffraction patterns of mechanically alloyed Fe85Nb5B10 powder were fitted using whole powder pattern decomposition procedure to resemble the presence of α-Fe type crystals with different Nb content. To do so, a ...
Artículo
Magnetic Multilayers as a Way to Increase the Magnetic Field Responsiveness of Magnetocaloric Materials
(American Scientific Publishers, 2012)
The magnetocaloric response of Ni–Cu based multilayers has been studied with the aim of optimizing their magnetic field dependence. In contrast to the behavior of single phase materials, whose peak magnetic entropy change ...
Artículo
Nanocrystallization Kinetics Under Instantaneous Growth Approximation: Experiments and Cellular Automata Simulations
(Wiley-Blackwell, 2010)
Nanocrystallization kinetics is analyzed in the frame of instantaneous growth approximation, which implies that the time required for a crystallite to reach its final size is negligible with respect to the time required ...
Artículo
Instantaneous growth approximation describing the nanocrystallization process of amorphous alloys: A cellular automata model
(Elsevier, 2008-07)
A cellular automata simulation based on an instantaneous growth approximation is developed to model the nanocrystallization kinetics. In this frame, the time required for a nucleus to grow up to its maximum size is ...