Buscar
Mostrando ítems 21-30 de 34
Artículo
Touch-free reactive flash sintering of dense strontium hexaferrite permanent magnet
(John Wiley and Sons, 2023)
This work presents an extension of the touch-free flash sintering technique. In the proposed technique, chemical reaction and sintering occur in a single step, without the use of electrodes, in the presence of electric ...
Artículo
Reactive flash sintering of SrFe12O19 ceramic permanent magnets
(Elsevier, 2022)
Reactive flash-sintering technique has been used in order to obtain strontium ferrite magnets from a mixture of SrCO3 and Fe2O3 commercial powders. This technique allows preparing sintered SrFe12O19 at a furnace temperature ...
Artículo
Correction of the Shape Effect on Magnetic Entropy Change in Ball Milled Fe70Zr30 Alloys
(Elsevier, 2018)
The field dependence of the magnetic entropy change (ΔSM) after mechanical alloying of Fe70Zr30 composition starting from high purity powders is studied. Samples with different shapes and different crystalline fraction X ...
Artículo
Effect of Thermal Treatments Below Devitrification Temperature on the Magnetic and Magnetocaloric Properties in Mechanically Alloyed Fe70Zr30 Powders
(Elsevier, 2023)
In this work, the relaxation of the amorphous structure of mechanically alloyed Fe70Zr30 powders has been analyzed through interrupted heating ramps below the devitrification temperature. As a result of such thermal ...
Artículo
Structural Relaxation in Fe(Co)SiAlGaPCB Amorphous Alloys
(Elsevier, 2014)
The structural relaxation of multicomponent Fe(Co)SiAlGaPCB amorphous alloys was investigated calorimetrically for annealed samples over a wide temperature range below the glass transition temperature. Upon heating, the ...
Artículo
Nanocrystallization Kinetics Understood as Multiple Microprocesses Following the Classical Theory of Crystallization
(Elsevier, 2016)
In this work, we propose a model for using the classical Johnson-Mehl-Avrami-Kolmogorov (JMAK) crystallization theory to analyze nanocrystallization processes as a set of multiple microprocesses. This model is based on the ...
Artículo
Grinding and particle size selection as a procedure to enhance the magnetocaloric response of La( Fe, Si)(13) bulk samples
(Elsevier, 2017-05)
The magnetocaloric effect of La(Fe,Si)13 samples deteriorates with the presence of secondary phases. However, it is highly challenging to produce single phase samples by conventional procedures and purification requires ...
Artículo
Microstructural Evolution Characterization of Fe-Nb-B Ternary Systems Processed by Ball Milling
(Taylor & Francis, 2009)
Fe-Nb-B alloys prepared by ball milling can undergo a complex microstructural evolution during milling. In order to overcome the limitations imposed by traditional X-ray bulk analysis, a comprehensive multi-technique ...
Artículo
Magnetic and Structural Characterization of Mo-Hitperm Alloys with Different Fe/Co Ratio
(Elsevier, 2011)
The influence of the Co content on the microstructure and magnetic behaviour of a series of amorphous and nanocrystalline (FeCo) 79Mo8Cu1B12 alloys is reported. Changes in the magnetic properties provoked by the microstructural ...
Artículo
Preferential Co Partitioning to α-Fe in Nanocrystalline CoFeNbB Alloys by Mn Addition
(Elsevier, 2009)
Influence of Mn addition on the microstructure and hyperfine parameters of amorphous and nanocrystalline Co60(FeMn)18Nb6B16 alloys has been studied. Although Mn addition does not yield significant differences in crystallization ...