NombreCenteno Báez, Gabriel
DepartamentoIngeniería Mecánica y Fabricación
Área de conocimientoIngeniería de los Procesos de Fabricación
Categoría profesionalCatedrático de Universidad
Correo electrónicoSolicitar
           
  • Nº publicaciones

    40

  • Nº visitas

    4048

  • Nº descargas

    4730


 

Artículo
IconIcon

Assessing Formability and Failure of UHMWPE Sheets throughSPIF: A Case Study in Medical Applications

Rosa-Sainz, Ana; Silva, M. Beatriz; Beltrán, Ana M.; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (MDPI, 2023)
This work presents a comprehensive investigation of an experimental study conducted on ultra-high molecular weight ...
Tesis Doctoral
Icon

Formability and failure of polymeric sheets: experimental assessment and medical applications

Rosa-Sainz, Ana; Centeno Báez, Gabriel; Silva, María Beatriz (2023)
Durante las últimas décadas, el paradigma de la Industria 4.0, que se dirige hacía procesos flexibles, de baja-media ...
Trabajo Fin de Grado
Icon

Análisis experimental de piezas tipo fabricadas mediante modelado por deposición de fundido (FDM) en la impresora 3D ULTIMAKER S5

Martínez Peña, María; Borrego Puche, Marcos; Centeno Báez, Gabriel (2023)
La fabricación aditiva ha experimentado en los útlimos años un gran desarollo y es por eso que se presenta la oportunidad ...
Artículo
Icon

Experimental investigation of polycarbonate sheets deformed by SPIF: formability, micro-mechanisms of failure and temperature analysis

Rosa-Sainz, Ana; Centeno Báez, Gabriel; Silva, María Beatriz; Vallellano Martín, Carpóforo (Elsevier, 2023)
This article presents an experimental research performed on a polycarbonate sheet deformed by single point incremental ...
Artículo
Icon

On the effective peek application for customized cranio-maxillofacial prostheses: An experimental formability analysis

Rosa-Sainz, Ana; García Romeu, María Luisa; Ferrer Real, Inés; Silva, María Beatriz; Centeno Báez, Gabriel (Elsevier, 2023)
Single Point Incremental Forming (SPIF) is a dieless and flexible forming technology that allows performing complex shapes ...
Artículo
Icon

Tube and Sheet Metal Forming Processes and Applications [Editorial]

Centeno Báez, Gabriel; Silva, María Beatriz (MDPI, 2022)
Ponencia
Icon

Numerical Modelling of Conventional and Incremental Forming of Thin-Walled Tube

Suntaxi, C.; Centeno Báez, Gabriel; Rosa-Sainz, Ana; Morales-Palma, Domingo; Vallellano Martín, Carpóforo (Trans Tech Publications Ltd., 2022)
This study presents a numerical analysis of the tube expansion process by conventional tube-end forming versus single point ...
Ponencia
Icon

Preliminary study on the use of 3D printed biodegradable polymeric sheet for the manufacturing of medical prostheses by SPIF

García Romeu, María Luisa; Ferrer Real, Inés; Pasotti, C.; Coma, J.; Rosa-Sainz, Ana; Centeno Báez, Gabriel (Elsevier, 2022)
Incremental Sheet Forming (ISF) and Fused Deposition Modelling (FDM) of polymers have both an edge over conventional ...
Tesis Doctoral
Icon

Stretch and shrink flanging of AA2024-T3 sheet by single point incremental forming

López Fernández, José Andrés; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (2021)
Flanging is a forming process widely used to increase the sti ness of sheet parts in industrial applications such as the ...
Artículo
Icon

Tube Expansion by Single Point Incremental Forming: An Experimental and Numerical Investigation

Suntaxi, C.; Centeno Báez, Gabriel; Silva, María Beatriz; Vallellano Martín, Carpóforo; Martins, P.A.F (MDPI, 2021)
In this paper, we revisit the formability of tube expansion by single point incremental forming to account for the material ...
Ponencia
Icon

Revisiting flangeability in hole-flanging by single-stage incremental forming and conventional process

Borrego Puche, Marcos; Morales-Palma, Domingo; López Fernández, José Andrés; Martínez Donaire, Andrés Jesús; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (PoPuPS (University of LiFge Library), 2021)
Recently, hole-flanging by single-stage incremental forming (SPIF) has been proposed as a suitable process to perform hole ...
Artículo
Icon

Stretch-flanging of AA2024-T3 sheet by single-stage SPIF

López Fernández, José Andrés; Centeno Báez, Gabriel; Martínez Donaire, Andrés Jesús; Morales-Palma, Domingo; Vallellano Martín, Carpóforo (Elsevier, 2021)
Flanging is a forming process that is commonly used in many high technology industrial applications such as the manufacturing ...
Ponencia
Icon

Design for FDM of flexible tooling for manufacturing aeronautical components by incremental sheet forming

Flores, G.; Palomo Vázquez, David; Martínez Donaire, Andrés Jesús; Borrego Puche, Marcos; López, J.A.; Morales Palma, Domingo; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (IOP Publishing, 2021)
Nowadays, industrial production is required to reduce industrialization times and development costs for new products while ...
Ponencia
Icon

Numerical analysis of necking in stretch-bending based on modified maximum force criteria

Morales, D.; Borrego Puche, Marcos; López, J. A.; Martínez Donaire, Andrés Jesús; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (IOP Conference Series: Materials Science and Engineering, 2021)
The necking criteria based on the maximum force principle, such as the Swift and Hill necking models, have been extensively ...
Ponencia
Icon

On the manufacturing of highly-customized near net-shape medical implants using magnesium alloy sheet

Castells, Joan; Guiglielmi, Pasquale; Ferrer Real, Inés; Centeno Báez, Gabriel; Palumbo, Gianfranco; Silva, M. Beatriz; García Romeu, María Luisa (Elsevier, 2020)
The purpose of this work is defining a global methodology framework for the manufacturing of medical implants using Mg ...
Artículo
Icon

Analysis of formability in conventional hole flanging of AA7075-O sheets: punch edge radius effect and limitations of the FLC

Borrego Puche, Marcos; Morales-Palma, Domingo; Martínez Donaire, Andrés Jesús; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (Springer, 2020)
Hole flanges are commonly manufactured in mass production by conventional press-working. In an industrial context, the ...
Artículo
Icon

On the Determination of Forming Limits in Polycarbonate Sheets

Sainz Rosa, Ana; Centeno Báez, Gabriel; Silva, María Beatriz; López Fernández, José Andrés; Martínez Donaire, Andrés Jesús; Vallellano Martín, Carpóforo (MDPI, 2020)
By proposing an adaptation of the methodology usually used in metal forming, this paper aims to provide a general procedure ...
Ponencia
Icon

Hole-flanging of AA7075-O sheets: Conventional process versus SPIF

Borrego Puche, Marcos; Morales-Palma, Domingo; López Fernández, José Andrés; Martínez Donaire, Andrés Jesús; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (Elsevier, 2020)
Recently, the research interest in hole-flanging for small and medium-sized batches has turned from conventional press-working ...
Artículo
Icon

Analysis of the influence of stress triaxiality on formability of hole-flanging by single-stage SPIF

Martínez Donaire, Andrés Jesús; Borrego Puche, Marcos; Morales Palma, Domingo; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (Elsevier, 2019)
Traditionally the fracture in sheet metal forming is characterized by the fracture forming limit (FFL) curve typically ...
Trabajo Fin de Máster
Icon

Análisis numérico de la conformabilidad de chapa de AISI304-H111 en procesos de conformado convencional e incremental mediante DEFORM™-3D

Fernández Díaz, Álvaro; Centeno Báez, Gabriel; Martínez Donaire, Andrés Jesús (2019)
El principal objetivo de este proyecto es la creación de diversos modelos numéricos para placas de acero AISI304-H111 ...
Trabajo Fin de Máster
Icon

Numerical analysis of formability and failure in tube inversion using i-Form

Delgado Muñoz, José Ignacio; Centeno Báez, Gabriel; Silva, María Beatriz (2019)
El trabajo se basa en un análisis numérico de tubos de Aluminio AA6063-T6 deformados con punzones de diferentes radios ...
Ponencia
Icon

Experimental and numerical analysis of the flanging process by SPIF

López Fernández, José Andrés; Centeno Báez, Gabriel; Martínez Donaire, Andrés Jesús; Morales-Palma, Domingo; Vallellano Martín, Carpóforo (Institute of Physics Publishing, 2018)
This paper analyses the flangeability of AA2024-T3 sheets using single point incremental forming (SPIF). With this purpose, ...
Ponencia
Icon

Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming

Morales-Palma, Domingo; Borrego Puche, Marcos; Martínez Donaire, Andrés Jesús; López Fernández, José Andrés; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (Institute of Physics Publishing, 2018)
Incremental sheet forming is a novel technology that has significant benefits compared to conventional forming. However, ...
Artículo
Icon

On the Analysis of the Contact Conditions in Temporomandibular Joint Prostheses

González-Pérez-Somarriba, B.; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo; González Pérez, Luis Miguel (Hindawi Limited, 2018)
Temporomandibular joint replacement (TMJR) is a complex surgical procedure in which the artificial joints available must ...
Artículo
Icon

Optimization of hole-flanging by single point incremental forming in two stages

Morales-Palma, Domingo; Borrego Puche, Marcos; Martínez Donaire, Andrés Jesús; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (MDPI, 2018)
Single point incremental forming (SPIF) has been demonstrated to accomplish current trends and requirements in industry. ...
Artículo
Icon

Revisiting Formability and Failure of AISI304 Sheets in SPIF: Experimental Approach and Numerical Validation

Centeno Báez, Gabriel; Martínez Donaire, Andrés Jesús; Bagudanch, Isabel; Morales-Palma, Domingo; García Romeu, María Luisa; Vallellano Martín, Carpóforo (MDPI, 2017)
Single Point Incremental Forming (SPIF) is a flexible and economic manufacturing process with a strong potential for ...
Artículo
Icon

A Market-Based Analysis on the Main Characteristics of Gearboxes Used in Onshore Wind Turbines

Vázquez-Hernández, Cristina; Serrano-González, Javier; Centeno Báez, Gabriel (MDPI, 2017)
Even though wind energy is one of the most mature renewable technologies, it is in continuous development not only because ...
Ponencia
Icon

Preliminary investigation on homogenization of the thickness distribution in hole-flanging by SPIF

Morales-Palma, Domingo; Borrego Puche, Marcos; Martínez Donaire, Andrés Jesús; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (Elsevier, 2017)
A drawback of the hole-flanging process by single-stage SPIF is the non-uniform thickness obtained along the flange. ...
Ponencia
Icon

Numerical explicit analysis of hole flanging by single-stage incremental forming

Martínez Donaire, Andrés Jesús; Morales-Palma, Domingo; Caballero, A.; Borrego Puche, Marcos; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (Elsevier, 2017)
The use of Single-Point Incremental Forming (SPIF) technology in hole flanging operations using multi-stages strategies ...
Trabajo Fin de Máster
Icon

Metodología de evaluación de desviaciones geométricas 3D en piezas planas y volumétricas mediante Geomagic Control

Chaves Aguilera, Gonzalo; Centeno Báez, Gabriel (2017)
El objetivo principal de este trabajo es generar una metodología de escaneo mediante el uso de un escaner Geomagic Capture® ...
Ponencia
Icon

Recent Approaches for the Manufacturing of Polymeric Cranial Prostheses by Incremental Sheet Forming

Centeno Báez, Gabriel; Bagudanch, Isabel; Morales-Palma, Domingo; García Romeu, María Luisa; González-Pérez-Somarriba, B.; Martínez Donaire, Andrés Jesús; González Pérez, Luis Miguel; Vallellano Martín, Carpóforo (Elsevier, 2017)
This paper presents recent research experiences developed with the aim of manufacturing cranial prostheses in polymeric ...
Trabajo Fin de Grado
Icon

Análisis numérico en DEFORM-3D de deformaciones límite en conformado incremental mono-punto de chapas de acero AISI304-H111

Fernández Díaz, Álvaro; Centeno Báez, Gabriel (2016)
El principal objetivo de este proyecto es crear un modelo numérico para placas de acero AISI304-H111 conformadas mediante ...
Trabajo Fin de Grado
Icon

Análisis numérico de la conformabilidad de chapas de AA2024 - T3 en procesos de conformado incremental mono - punto usando DEFORM - 3D

Candel Carreras, Zoila; Centeno Báez, Gabriel (2015)
El método de los elementos finitos es un método numérico muy usado en ingeniería para la resolución de problemas complejos ...
Ponencia
Icon

On the study of the single-stage hole-flanging process by SPIF

Borrego Puche, Marcos; Morales-Palma, Domingo; Martínez Donaire, Andrés Jesús; Centeno Báez, Gabriel; Vallellano Martín, Carpóforo (Elsevier, 2015)
Recent studies show the capability of single-point incremental forming to perform successfully hole-flanging operations ...
Ponencia
Icon

Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming

Silva, María Beatriz; Martínez Donaire, Andrés Jesús; Centeno Báez, Gabriel; Morales-Palma, Domingo; Vallellano Martín, Carpóforo; Martins, P.A.F (Elsevier, 2015)
Forming limit diagrams (FLD’s) are used to evaluate the workability of metal sheets. FLD’s provide the failure locus at ...
Artículo
Icon

Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming

Centeno Báez, Gabriel; Bagudanch, Isabel; Martínez Donaire, Andrés Jesús; García Romeu, María Luisa; Vallellano Martín, Carpóforo (Elsevier, 2014)
Single-Point Incremental Forming (SPIF) is an emerging manufacturing process especially suitable to pro-duce small batches ...
Ponencia
Icon

Experimental Study on the Evaluation of Necking and Fracture Strains in Sheet Metal Forming Processes

Centeno Báez, Gabriel; Martínez Donaire, Andrés Jesús; Vallellano Martín, Carpóforo; Martínez Palmeth, Luis Humberto; Morales-Palma, Domingo; Suntaxi, C.; García-Lomas Jung, Francisco Javier (Elsevier, 2013)
In this paper the formability of AA2024-T3 metal sheets is experimentally analyzed. For this purpose, a series of ...
Patente
Icon

Sistema de transmisión continuamente variable.

Garcia Benitez, Francisco de Asis; Perez Guerrero, Francisco de Borja; Centeno Báez, Gabriel; Morales Sánchez, Francisco José (Oficina Española de Patentes y Marcas , 2011)
Se trata de un sistema de transmisión continuamente variable (CVT), regulado por un mecanismo inercial que contempla un ...
Tesis Doctoral
Icon

Desarrollo de un sistema de transmisión inercial continuamente variable para automoción

Centeno Báez, Gabriel; García Benítez, Francisco (2010)
En esta Tesis Doctoral se desarrolla un sistema de transmisión de potencia con aplicación en automoción. Se trata de un ...
Artículo
Icon

Experimental study of impact on SMC composites used in the automotive industry

Centeno Báez, Gabriel; García Benítez, Francisco; Wideberg, Johan (Inderscience, 2007)
The signal from a piezoelectric sensor received by a data acquisition system was used to record the temporal evolution of ...