Author profile: Arévalo Mora, Cristina María
Institutional data
Name | Arévalo Mora, Cristina María |
Department | Ingeniería y Ciencia de los Materiales y del Transporte |
Knowledge area | Ciencia de los Materiales e Ingeniería Metalúrgica |
Professional category | Profesora Titular de Universidad |
Request | |
Statistics
-
No. publications
34
-
No. visits
4585
-
No. downloads
5990
Publications |
---|
Article
Integration of space-holder technique and spark plasma sintering: An innovative approach for crafting radially graded porosity implants
(Elsevier, 2024)
Bone resorption and possible fracture of host tissue are some consequences resulting from the mismatch between the Young's ... |
Article
Manufacturing via Plasma Metal Deposition of Hastelloy C-22 Specimens Made from Particles with Different Granulometries
(MDPI, 2024)
Additive manufacturing techniques offer significant advantages for creating complex components efficiently, saving both ... |
Article
Understanding the synergetic effects of mechanical milling and hot pressing on bimodal microstructure and tribo-mechanical behavior in porous Ti structures
(Elsevier, 2023)
The utilization of porous biomedical implants featuring a bimodal microstructure has garnered substantial interest within ... |
Article
Effect of HVOF processing parameters on Cr₃C₂-NiCr hard coatings deposited on AISI 4140 steel
(Elsevier, 2023)
High Velocity Oxygen Fuel (HVOF) thermal spray coating is a deposition process that is widely employed at present to improve ... |
Article
Comparative study of the behaviour of several reinforcement materials in titanium matrix produced by Rapid Sinter Pressing Manufacturing
(Editorial CSIC, 2022)
Regarding titanium matrix composites (TMCs), their properties strongly depend on the reinforcement material employed for ... |
Article
Influence of Processing Conditions on the Mechanical Properties of 17-4PH Specimens Produced by Additive Manufacturing
(MDPI, 2022)
The purpose of this research is to study the influence of the processing conditions that affect the final behaviour of ... |
Chapter of Book
Aproximación a la fabricación mediante mediante la técnica Fused Filament Fabrication
(3ciencias, 2022)
Dentro de las técnicas más innovadoras de fabricación aditiva, va cogiendo fuerza la denominada Fused Filament Fabrication ... |
Chapter of Book
Descripción de la fabricación de materiales base hierro mediante la técnica de plasma metal deposition
(3ciencias, 2022)
La fabricación industrial de componentes a partir de materiales base hierro y base níquel se ha venido llevando a cabo ... |
Article
Fabrication and Characterization of Bioactive Gelatin–Alginate–Bioactive Glass Composite Coatings on Porous Titanium Substrates
(American Chemical Society, 2022)
In this research work, the fabrication of biphasic composite implants has been investigated. Porous, commercially available ... |
Article
Effect of the Processing Parameters on the Porosity and Mechanical Behavior of Titanium Samples with Bimodal Microstructure Produced via Hot Pressing
(MDPI, 2022)
Commercially pure (c.p.) titanium grade IV with a bimodal microstructure is a promising material for biomedical implants. ... |
Presentation
Desarrollo y estudio de piezas con geometrías complejas de aleaciones de titanio fabricadas a partir de polvo y alambre mediante la técnica aditiva de fusión de metal mediante plasma
(3Ciencias, 2021)
El titanio y sus aleaciones son materiales de gran demanda en la industria aeroespacial que presentan un alto coste de ... |
Presentation
Estudio del procesamiento de la aleación de níquel Hastelloy C-22 mediante la técnica de fabricación aditiva plasma metal deposition (PMD)
(3Ciencias, 2021)
La fabricación aditiva ha despertado gran interés en la industria metalúrgica debido a que la producción de piezas cercanas ... |
Article
Graphene-coated Ti-Nb-Ta-Mn foams: A promising approach towards a suitable biomaterial for bone replacement
(Elsevier, 2020)
The design of bone implants with proper biological and mechanical properties remains a challenge in medical implantology. ... |
Article
Effect of processing atmosphere and secondary operations on the mechanical properties of additive manufactured AISI 316L stainless steel by Plasma Metal Deposition
(MDPI, 2020)
Plasma metal deposition (PMD) is an interesting additive technique whereby diverse materials can be employed to produce ... |
Article
In Vitro Bone Cell Behavior on Porous Titanium Samples: Influence of Porosity by Loose Sintering and Space Holder Techniques
(MDPI, 2020)
A great variety of powder metallurgy techniques can produce biomimetic porous titanium structures with similar mechanical ... |
Chapter of Book
Fabricación de hastelloy C-22 mediante plasma transferred ARC
(3ciencias, 2020)
La técnica de fabricación aditiva conocida como Plasma Transferred Arc (PTA), permite el procesado de piezas con geometrías ... |
Chapter of Book
Investigation of titanium composites produced via Plasma Transferred ARC: influence of the processing parameters on the composites’ microstructures
(3ciencias, 2020)
Los materiales compuestos de base titanio son materiales muy valorados por sus excelentes propiedades específicas. El ... |
Article
Reaction Layer Analysis of In Situ Reinforced Titanium Composites: Influence of the Starting Material Composition on the Mechanical Properties
(MDPI, 2020)
This study aims at the analysis of the reaction layer between titanium matrices and reinforcements: B4C particles and/or ... |
Article
Processing by Additive Manufacturing Based on Plasma Transferred Arc of Hastelloy in Air and Argon Atmosphere
(MDPI, 2020)
This research was carried out to determinate the effect of the atmosphere processing conditions (air and argon) and two ... |
Presentation
Estudio preliminar de los parámetros de fabricación en las propiedades finales de piezas de titanio comercialmente puro con geometrías sencillas producidos mediante la técnica de “additive manufacturing”
(3 ciencias. Área de Innovación y Desarrollo,S.L., 2019)
La necesidad de fabricar piezas de geometrías complejas empleando materiales ligeros con altas propiedades, en el sector ... |
Article
Porous Titanium for Biomedical Applications: Evaluation of the Conventional Powder Metallurgy Frontier and Space-Holder Technique
(MDPI, 2019)
Titanium and its alloys are reference materials in biomedical applications because of their desirable properties. However, ... |
Chapter of Book
In Situ Titanium Composites: XRD Study of Secondary Phases Tied to the Processing Conditions and Starting Materials
(IntechOpen, 2019)
Nowadays, the development of high specific modulus materials involves studies of new materials and novel manufacturing ... |
Presentation
Estudio y comparativa de la influencia del tipo de refuerzo en materiales compuestos de base titanio fabricados por técnicas de compactación caliente inductiva
(3 ciencias. Área de Innovación y Desarrollo,S.L., 2019)
La constante necesidad de mejora en el sector aeronáutico y aeroespacial introdujo el uso de materiales compuestos de ... |
Article
Improvement of the balance between a reduced stress shielding and bone ingrowth by bioactive coatings onto porous titanium substrates
(Elsevier, 2018)
Commercial pure titanium is known as good substitute for cortical bone tissue. Nevertheless, stress-shielding and the lack ... |
Final Degree Project
Análisis y caracterización de polvos de partida empleados en la fabricación de TMCs
(2018)
Dentro de las tecnologías existentes para el procesado del metal, se encuentra la pulvimetalurgia. El área pulvimetalúrgica ... |
Article
Microstructural and XRD analysis and study of the properties of the system Ti-TiAl-B4C processed under different operational conditions
(MDPI, 2018)
High specific modulus materials are considered excellent for the aerospace industry. The system Ti-TiAl-B4C is presented ... |
Article
Study of the Influence of TiB Content and Temperature in the Properties of In Situ Titanium Matrix Composites
(MDPI, 2017)
This work focuses on the study of the microstructure, hardening, and stiffening effect caused by the secondary phases ... |
Article
Analysis of the Influence of Starting Materials and Processing Conditions on the Properties of W/Cu Alloys
(MDPI, 2017)
In this work, a study of the influence of the starting materials and the processing time used to developW/Cu alloys is ... |
Article
Analysis of the microstructure and mechanical properties of Titanium-based composites reinforced by secondary phases and B4C particles produced via direct hot pressing
(MDPI, 2017)
In the last decade, titanium metal matrix composites (TMCs) have received considerable attention thanks to their interesting ... |
Article
Influence of sintering temperature on the microstructure and mechanical properties of in situ reinforced titanium composites by inductive hot pressing
(MDPI AG, 2016)
This research is focused on the influence of processing temperature on titanium matrix composites reinforced through Ti, ... |
Presentation
Fabricación mediante innovadoras técnicas pulvimetalúrgicas de materiales compuestos de matriz ligera
(Editorial Área de Innovación y Desarrollo, 2016)
Hoy en día el interés por desarrollar nuevos materiales que satisfagan las necesidades tecnológicas, conlleva a un estudio ... |
Final Degree Project
Efecto del tamaño de poro en el comportamiento biomecánico y biofuncional de implantes de titanio
(2015)
Debido al envejecimiento en aumento de la sociedad, hay una creciente necesidad de implantes para sustitución de hueso y ... |
Article
Diseño, procesado y caracterización, procesado y caracterización de materiales con porosidad radial controlada para aplicaciones nucleares
(Grupo Español de Fractura, 2015)
Las pastillas de combustible irradiado presentan un gradiente de porosidad radial como consecuencia de la presencia de gas ... |
Article
Nanocrystalline Al Composites from Powder Milled under Ammonia Gas Flow
(Hindawi Publishing Corporation, 2014)
The production of high hardness and thermally stable nanocrystalline aluminium composites is described. Al powder was ... |