Buscar
Mostrando ítems 1-10 de 13
Artículo
Closed-form methodology for stress analysis of composite plates with cutouts and non-uniform lay-up
(Elsevier, 2019-03)
This study aims to develop a closed-form methodology for estimating the resultant forces in a finite composite plate, weakened by the presence of elliptical cutouts, under membrane loads. Following an innovative approach, the ...
Artículo
A linear elastic-brittle interface model: application for the onset and propagation of a fibre-matrix interface crack under biaxial transverse loads
(Springer, 2015-09)
A new linear elastic and perfectly brittle interface model for mixed mode is presented and analysed. In this model, the interface is represented by a continuous distribution of springs which simulates the presence of a ...
Artículo
Modelo de interfase elástica lineal frágil (MIELF) aplicado a problemas tridimensionales con crecimiento de grietas en modo mixto
(Grupo Español de Fractura, 2016-03)
En la actualidad, desde un punto de vista numérico, la mayoría de investigaciones sobre los despegues y/o delaminaciones que aparecen en las interfases se centran en modelos 2D. Para modelar el comportamiento no lineal ...
Artículo
Caracterización del inicio y crecimiento de grietas de interfaz entre fibra y matriz bajo cargas transversales biaxiales usando el modelo de interfaz elástica lineal-frágil
(Grupo Español de Fractura, 2011)
En el presente trabajo se estudia el inicio y crecimiento de una grieta de interfaz entre fibra y matriz bajo cargas transversales biaxiales de tracción - tracción y tracción - compresión. Se considera un problema ...
Artículo
Study of transversal and delamination cracks in [0/90] symmetric laminates by means of the linear elastic brittle interface formulation
(Grupo Español de Fractura, 2012)
En el presente trabajo se estudia el inicio y crecimiento de grietas transversales y de delaminación en laminados simétricos [0/90], bajo cargas de tracción en la dirección de las fibras en las láminas externas. El ...
Artículo
Evaluation of interfacial fracture toughness and friction coefficient in the single fiber fragmentation test
(Elsevier, 2011)
Single fiber fragmentation test is extensively employed to characterize the fiber-matrix interface in composites. A novel technique for evaluating fracture toughness and friction coefficient at the fiber-matrix interface ...
Artículo
Caracterización del daño de acuerdo a la mecánica de la fractura en laminados 0/90
(Grupo Español de Fractura, 2004)
Los laminados 0/90 de materiales compuestos fibrosos cuando son sometidos a carga en la dirección de las fibras a cero grados, presentan un daño consistente en la aparición de grietas transversales en las láminas a 90 ...
Artículo
Closed-form methodology for the bending of symmetric composite plates with cutouts and non-uniform lay-up
(Elsevier, 2021-09)
The present work is focused on the development of a Lekhnitskii-based closed-form methodology for the analysis of composite plates with elliptical cutouts and non-uniform lay-up, under bending loads. Due to an innovative ...
Artículo
Accurate determination of the stiffness properties for an elastic interface under peeling conditions between homogeneous materials
(Elsevier, 2022-04)
In this paper, several models for analysing peeling tests are considered, including numerical models based on FEM, semi-analytical approaches, and beam models including an elastic interface. Results show that none of the ...
Artículo
On the 3D extension of failure models for adhesive joints under mixed-mode fracture conditions: LEBIM and CZM
(Elsevier, 2019-04)
Interface models for triggering damage events have been extensively used in many engineering applications due to their inherent versatility and relatively simple numerical implementations. Usually, the non-linear behavior ...