Buscar
Mostrando ítems 1-10 de 11
Ponencia
Study of the influence of stacking sequence in the failure of crossply laminates manufactured with ultra-thin plies
(Asociación Española de Materiales Compuestos (AEMAC), 2024-01)
Numerous studies on the use of laminates manufactured with ultra-thin composite laminates have shown the existence of a significant delay in the appearance of damage, a phenomenon known as the Scale Effect. To study the ...
Artículo
Efecto de tamaño en laminados cruzados: Estudio de la transición entre escalas de la iniciación de grietas usando un enfoque variacional de la mecánica de la fractura
(Sociedad Española de Integridad Estructural. Grupo español de Fractura, 2021-07)
Este trabajo estudia el fenómeno de agrietamiento transversal en laminados cruzados a partir de la progresión del daño entre escalas. Con este propósito se generaron modelos mesomecánicos de la capa transversal con un ...
Artículo
Numerical study of the inter-fibre failure under biaxial loads
(Elsevier, 2011)
The inter-fibre/matrix failure under transverse tension has already been the object of several micromechanical studies by the authors, for single fibre case or dilute packing. These studies have made it possible to understand ...
Artículo
Bending and free vibration analysis of functionally graded graphene vs. carbon nanotube reinforced composite plates
(Elsevier, 2018-02)
Carbon-based nanomaterials have drawn the attention of a large section of the scientific community in recent years. Most research has focused on carbon nanotubes after some experimental studies reported outstanding ...
Ponencia
Influence of micromechanics in composite panels buckling loads
(Víctor Compán Cardiel [etc.], 2015)
In-plane compression loads may cause buckling of fiber-reinforced composite panels. An accurate knowledge of these critical buckling loads is essential for structural design. In all cases of buckling of panels, critical ...
Artículo
Numerical analysis of the influence of a nearby fibre on the interface crack growth in composites under transverse tensile load
(European Structural Integrity Society, 2016)
In this paper the interface crack growth associated to the inter-fibre failure under tension is studied by means of a two-fibres BEM model. The influence of the presence of an undamaged secondary fibre on the evolution ...
Artículo
Crack detection and localization in RC beams through smart MWCNT/epoxy strip-like strain sensors
(IOP Publishing, 2018-10)
In recent years, self-sensing structural materials have drawn enormous attention of scientific community due to their potential to enable continuous monitoring of the integrity of structures. The new paradigm of smart ...
Artículo
Multiscale Characterisation of Cortical Bone Tissue
(MDPI, 2019-12)
Multiscale analysis has become an attractive technique to predict the behaviour of materials whose microstructure strongly changes spatially or among samples, with that microstructure controlling the local constitutive ...
Artículo
Inter-fibre failure under biaxial loads in glass–epoxy composite materials: Effect of the presence of a nearby fibre
(Elsevier, 2023-10)
Fibre-reinforced composite materials are especially prone to transverse failure. It appears at the lamina level following the mechanism known as matrix/inter-fibre failure. This mechanism of damage is associated with the ...
Artículo
CNT-polymer nanocomposites under frictional contact conditions
(Elsevier, 2018-12)
The unique intrinsic physical properties of Carbon NanoTubes (CNTs) suggest that they are ideal fillers for high-performance composites. Although some experimental studies have revealed the potential of these nanoparticles ...