Buscar
Mostrando ítems 1-10 de 18
Artículo
Design, processing and characterization of titanium with radial graded porosity for bone implants porosity for bone implants
(Elsevier, 2016-07)
Titanium cylinders with radial graded porosity, which are potentially suitable for biomedical applications (replacement of cortical and trabecular bones involved in different joint and dental restorations), have been ...
Artículo
Bacterial behavior on coated porous titanium substrates for biomedical applications
(Elsevier, 2019)
In this work, bacterial behavior on dense and porous titanium substrates is discussed. Porous titanium was fabricated by a space holder technique (using 50 vol%, NH4HCO3 with particle sizes between 250 and 355 μm). These ...
Artículo
Sol-gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications
(Elsevier, 2018)
The stress shielding and the poor osseointegration in titanium implants are still problems to be resolved. In this context, this work proposes a balanced solution. Titanium samples were fabricated, with a porosity of ...
Artículo
An approach using highly sensitive carbon nanotube adhesive films for crack growth detection under flexural load in composite structures
(Elsevier, 2019-09)
Sensing capabilities of carbon nanotube (CNT)doped adhesive films under bending conditions were investigated. Standard Mode-II coupons and skin-stringer sub-elements were manufactured while their electrical resistance was ...
Artículo
Influence of Milling Atmosphere on the Controlled Formation of Ultrafine Dispersoids in Al-Based MMCs
(MDPI, 2016)
Properties of compacts made from aluminium powder, milled under different atmospheres, were evaluated. The duration of all the milling processes was 10 h, although different atmospheres were tested: vacuum, confined ...
Artículo
Surface modification of Ti-6Al-4V alloys manufactured by selective laser melting: Microstructural and tribo-mechanical characterization
(Elsevier, 2018)
Medical grade of both titanium (Ti) and Ti6Al4V alloy are recognized as the metallic biomaterials with the better outcomes for clinical repair of bone tissue thanks to their suitable mechanical properties and corrosion ...
Artículo
Model of dissolution in the framework of tissue engineering and drug delivery
(Springer, 2018-10)
Dissolution phenomena are ubiquitously present in biomaterials in many different fields. Despite the advantages of simulation-based design of biomaterials in medical applications, additional efforts are needed to derive ...
Artículo
Physical proximity of chromatin to nuclear pores prevents harmful R loop accumulation contributing to maintain genome stability
(National Academy of Sciences, 2017)
During transcription, the mRNA may hybridize with DNA, forming an R loop, which can be physiological or pathological, constituting in this case a source of genomic instability. To understand the mechanism by which eukaryotic ...
Artículo
Consolidation by MF-ERS of mechanically alloyed Al powder
(Elsevier, 2019-07)
The aim of this work is to study the viability of producing, by medium-frequency electrical resistance sintering (MF-ERS), compacts from mechanically alloyed aluminium powders. The MF-ERS process was carried out using ...
Artículo
Synthesis, characterization and performance of robust poison-resistant ultrathin film yttria stabilized zirconia – nickel anodes for application in solid electrolyte fuel cells
(Elsevier, 2016)
We report on the synthesis of undoped ∼5 μm YSZ-Ni porous thin films prepared by reactive pulsed DC magnetron sputtering at an oblique angle of incidence. Pre-calcination of the amorphous unmodified precursor layers followed ...