2025-03-072025-03-072025-02Sánchez Moreno, H., García Rodríguez, L. y Recalde Moreno, C. (2025). Natural cellulose fibers from Agave Americana L. ASPARAGACEAE as an effective adsorbent for mercury in aqueous solutions. Adsorption, 31 (2), 40. https://doi.org/10.1007/s10450-024-00590-4.0929-5607https://hdl.handle.net/11441/169813This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.This study investigated the use of functionalized cabuya fibers (FCF) as an effective adsorbent for Hg (II) removal from aqueous solutions. The composition, surface properties, and morphology of the FCF were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), and Fourier transform infrared spectroscopy (FTIR). The effects of the pH, contact time, temperature, adsorbent dosage, and initial Hg (II) concentration on the adsorption process were studied. Under optimized experimental conditions, FCF achieved a removal efficiency exceeding 92%, with a maximum adsorption capacity of 8.29 mg/g. The experimental data for the FCF isotherm were analyzed using the Langmuir, Freundlich, DR, and Temkin adsorption models. Notably, the Langmuir isotherm exhibited the highest R² value of 0.99, indicating the model’s strong applicability. The pseudo-second-order kinetic model k2 = 0.42 mg/g.min was employed to elucidate the adsorption mechanism. Thermodynamic studies of the adsorbent FCF were conducted, and ΔG° (-6.16 kJ/mol), ΔH° (36.29 kJ/mol), and ΔS° (141.98 kJ/mol·K) were calculated, assessing the feasibility of the process. Additionally, the desorption results of FCF were evaluated, demonstrating that it can be reused for up to three cycles, achieving adsorption rates of 74% and 62% in the third cycle. This indicates its stability and recycling capacity. Finally, the effectiveness of the FCF was demonstrated by eliminating approximately 91% of Hg (II) from real mineral water samples in Ecuador. These results highlight the p of FCF as promising, eco-friendly, and sustainable adsorbents for the remediation of Hg (II) contamination in aquatic systems.application/pdf27 p.engAttribution 4.0 Internationalhttp://creativecommons.org/licenses/by/4.0/Hg (II) adsorptionMining wastewater treatmentAdsorption isothermKinetic modelsAdsorption isothermsNatural fibersinfo:eu-repo/semantics/articleinfo:eu-repo/semantics/openAccess10.1007/s10450-024-00590-4