Listar Artículos (Instituto de Ciencia de Materiales de Sevilla (ICMS) – CIC Cartuja) por agencia financiadora "Gobierno de España"
Mostrando ítems 1-20 de 35
-
Artículo
A novel, simple and rapid route to the synthesis of boron cabonitride nanosheets: combustive gaseous unfolding
(Nature Publishing Group, 2017)The ternary compound boron carbonitride (BCN) was synthesized in the form of few-layer nanosheets through a mechanically ...
-
Artículo
Absence of the core–rim microstructure in TixTa1 − xCyN1 − y-based cermets developed from a pre-sintered carbonitride master alloy
(Elsevier, 2012)(Ti,Ta)(C,N) solid solution-based cermets with cobalt as the binder phase were synthesised by a two-step milling process. ...
-
Artículo
An investigation on the formation mechanism of nano ZrB2 powder by a magnesiothermic reaction
(Elsevier, 2014)Nanocrystalline zirconium diboride (ZrB2) powder was produced by mechanochemistry from the magnesiothermic reduction in ...
-
Artículo
Autocalibrating quasistatic M‐H hysteresis loop tracer with negligible drift
(AIP Publishing, 1996)A computer‐controlled system for measuring M‐Hhysteresis loops of soft magnetic materials is described. It overcomes many ...
-
Artículo
Chemical and electrical properties of LSM cathodes prepared by mechanosynthesis
(Elsevier, 2014)Mechanosynthesis of La1-xSrxMnO3 (x = 0, 0.25, 0.5, 0.75 and 1) was carried out at room temperature from stoichiometric ...
-
Artículo
Development of multicomponent-multiphase materials based on (Ti, Ta, Nb)CxN1-x carbonitride solid solutions
(Elsevier, 2012)A set of powdered cermets based on (Ti,Ta,Nb)C xN 1-x carbonitride solid solutions were synthesized from mixtures of ...
-
Artículo
Direct mechanosynthesis of pure BiFeO3 perovskite nanoparticles: reaction mechanism
(Royal Society of Chemistry (Great Britain), 2013)In this work, a mechanochemical procedure is proposed as a simple and fast method to synthesize the pure BiFeO3 perovskite ...
-
Artículo
Effect of sintering time on the microstructure and mechanical properties of (Ti,Ta)(C,N)-based cermets
(Elsevier, 2013)Complete solid-solution cermets based on titanium-tantalum carbonitride using a starting nominal composition with 80 wt.% ...
-
Artículo
Effect of tantalum content on the microstructure and mechanical behavior of cermets based on (TixTa1-x)(C0.5N0.5) solid solutions
(Elsevier, 2014)Titanium-tantalum carbonitride, (Ti, Ta)(C, N), based cermets with different Ti and Ta contents were prepared using a ...
-
Artículo
Electrical properties of stoichiometric BiFeO3 prepared by mechanosynthesis with either conventional or spark plasma sintering
(Wiley, 2013)Phase-pure powders of stoichiometric BiFeO3 have been prepared by mechanosynthesis. Ceramics sintered by either conventional ...
-
Artículo
Enhanced oxidation resistance of Ti(C,N)-based cermets containing Ta
(Elsevier, 2014)(TixTa1-x)(C0.5N0.5)-Co-based cermets with various Ta contents (x=0, 0.01, 0.05, 0.1 and 0.2) were oxidized at 900°C for ...
-
Artículo
Exalted photocatalytic activity of tetragonal BiVO4 by Er 3+ doping through a luminescence cooperative mechanism
(Royal Society of Chemistry (Great Britain), 2014)Er-doped BiVO4 are synthesized by means of a surfactant free microwave assisted hydrothermal method having good photoactivities ...
-
Artículo
Formation mechanism of ZrB2-Al2O3 nanocomposite powder by mechanically induced self-sustaining reaction
(Springer Verlag, 2013)ZrB2-Al2O3 nanocomposite powder was produced by aluminothermic reduction in Al/ZrO2/B2O 3 system. In this research, high ...
-
Artículo
High temperature oxidation resistance of (Ti,Ta)(C,N)-based cermets
(Elsevier, 2016)Cermets based on titanium–tantalum carbonitride were oxidized in static air between 800 °C and 1100 °C for 48 h. The ...
-
Artículo
Hot-Pressing of (Ti, Mt)(C, N)-Co-Mo2C (Mt=Ta, Nb) powdered cermets synthesized by a mechanically induced self-sustaining reaction
(Elsevier, 2016)A mechanically induced self-sustaining reaction (MSR) has been successfully employed for manufacturing powdered cermets ...
-
Artículo
In-situ synthesis of a ZrB2–based composite powder using a mechanochemical reaction for the zircon/magnesium/boron oxide/graphite system
(Wiley, 2015)A ZrSiO4/B2O3/Mg/C system was used to synthesize a ZrB2-based composite through a high-energy ball milling process. As a ...
-
Artículo
Influence of the milling parameters on the mechanical work intensity in planetary mills
(Elsevier, 2013)The formation of ZnSe via a mechanically-induced self-sustaining reaction (MSR) from a Zn/Se mixture showed that only size ...
-
Artículo
Inverse core-rim microstructure in (Ti,Ta)(C,N)-based cermets developed by a mechanically induced self-sustaining reaction
(Elsevier, 2012)Cermets with a nominal composition (Ti 0.8Ta 0.2C 0.5N 0.5- 20 wt.% Co) were synthesised by a mechanically induced ...
-
Artículo
Kinetic studies in solid state reactions by sample-controlled methods and advanced analysis procedures
(Akadémiai Kiadó (Budapest), 2013)A comparative study of both conventional rising temperature and sample-controlled methods, like constant rate thermal ...
-
Artículo
Kinetics of high-temperature oxidation of (Ti,Ta)(CN)-based cermets
(Elsevier, 2016)The kinetics of the high-temperature oxidation of titanium–tantalum carbonitride-based cermets with different Ti/Ta ratios ...