Browsing by Author "Córdoba Gallego, José Manuel"
Now showing items 1-20 of 28
-
Article
Absence of the core–rim microstructure in TixTa1 − xCyN1 − y-based cermets developed from a pre-sintered carbonitride master alloy
(Elsevier, 2012)(Ti,Ta)(C,N) solid solution-based cermets with cobalt as the binder phase were synthesised by a two-step milling process. ...
-
Final Degree Project
Aplicación de nanopartículas en la terapia de enfermedades oculares
(2017-07)La presente revisión bibliográfica está centrada en el uso de nanopartículas (NPs) para el tratamiento de enfermedades ...
-
Final Degree Project
Biomarcadores oculares
(2020)La actual revisión bibliográfica está enfocada en el uso de los biomarcadores en cuanto a las enfermedades oculares. La ...
-
Final Degree Project
Biomateriales para implantes oculares
(2019)En esta revisión bibliográfica tratamos los diferentes biomateriales utilizados en tres tipo s de implantes ...
-
PhD Thesis
Desarrollo de cermets basados en soluciones sólidas mediante procesos mecanoquímicos
(2014-06-17)Tal como se ha indicado en el capítulo anterior, se ha propuesto que el desarrollo de cermets utilizando como material ...
-
Article
Development of multicomponent-multiphase materials based on (Ti, Ta, Nb)CxN1-x carbonitride solid solutions
(Elsevier, 2012)A set of powdered cermets based on (Ti,Ta,Nb)C xN 1-x carbonitride solid solutions were synthesized from mixtures of ...
-
Final Degree Project
Efectos potenciales de los microplásticos en la salud humana
(2021)La presente revisión bibliográfica está centrada en las posibles rutas de exposición y efectos de los microplásticos sobre ...
-
Article
Effect of sintering time on the microstructure and mechanical properties of (Ti,Ta)(C,N)-based cermets
(Elsevier, 2013)Complete solid-solution cermets based on titanium-tantalum carbonitride using a starting nominal composition with 80 wt.% ...
-
Article
Effect of tantalum content on the microstructure and mechanical behavior of cermets based on (TixTa1-x)(C0.5N0.5) solid solutions
(Elsevier, 2014)Titanium-tantalum carbonitride, (Ti, Ta)(C, N), based cermets with different Ti and Ta contents were prepared using a ...
-
Article
Enhanced oxidation resistance of Ti(C,N)-based cermets containing Ta
(Elsevier, 2014)(TixTa1-x)(C0.5N0.5)-Co-based cermets with various Ta contents (x=0, 0.01, 0.05, 0.1 and 0.2) were oxidized at 900°C for ...
-
Article
High temperature oxidation resistance of (Ti,Ta)(C,N)-based cermets
(Elsevier, 2016)Cermets based on titanium–tantalum carbonitride were oxidized in static air between 800 °C and 1100 °C for 48 h. The ...
-
Article
Hot-Pressing of (Ti, Mt)(C, N)-Co-Mo2C (Mt=Ta, Nb) powdered cermets synthesized by a mechanically induced self-sustaining reaction
(Elsevier, 2016)A mechanically induced self-sustaining reaction (MSR) has been successfully employed for manufacturing powdered cermets ...
-
Article
Influence of the preparation method in the metal-support interaction and reducibility of Ni-Mg-Al based catalysts for methane steam reforming
(Elsevier, 2019)Ni-Mg-Al based catalysts were prepared using different preparation methods (impregnation, impregnation-coprecipitation and ...
-
Article
Inverse core-rim microstructure in (Ti,Ta)(C,N)-based cermets developed by a mechanically induced self-sustaining reaction
(Elsevier, 2012)Cermets with a nominal composition (Ti 0.8Ta 0.2C 0.5N 0.5- 20 wt.% Co) were synthesised by a mechanically induced ...
-
Article
Kinetics of high-temperature oxidation of (Ti,Ta)(CN)-based cermets
(Elsevier, 2016)The kinetics of the high-temperature oxidation of titanium–tantalum carbonitride-based cermets with different Ti/Ta ratios ...
-
Article
Liquid-phase sintering of Ti(C,N)-based cermets. the effects of binder nature and content on the solubility and wettability of hard ceramic phases
(Elsevier, 2013)Different commercial TiC-TiN/Co/Ni mixtures were used as raw materials for Ti(C,N) cermets, and the effects of the sintering ...
-
Final Degree Project
Nanopartículas bio-inspiradas para el tratamiento de enfermedades infecciosas
(2021-07)Las nanopartículas suponen un nuevo avance en el tratamiento de enfermedades infecciosas, de especial importancia son ...
-
Article
Processing and characterisation of cermet/hardmetal laminates with strong interfaces
(Elsevier, 2014)Cemented carbides and cermets are potential materials for high speed machining tools. However, cemented carbides are not ...
- PhD Thesis
-
Article
Room temperature mechanosynthesis of the La 1-xSr xMnO 3±δ (0≤x≤1) system and microstructural study
(Elsevier, 2012)Monophase nanocrystalline powders belonging to the La 1-xSr xMnO 3±δ system (0≤x≤1) with a perovskite structure have been ...